NOW PART OF Tippette Full Sized Rocker Switches PRODUCT WEBPAGE request sample, configure part The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. 1-4 10-20 125-250 12-30 Poles Amps VAC Max VDC Max Typical Applications General Purpose Applications Commercial Food Recreational Vehicles www.carlingtech.com 860.793.9281 sales carlingtech.comTech Specs Electrical Physical Contact Rating 15 amps, 125 VAC Lighted Incandescent - rated 10,000 hours 10 amps, 250 VAC Neon - rated 25,000 hours 3/4 HP 125-250 VAC Seals Bracket - Actuator WBL/MBL 15 amps, 12-30 VDC optional external gasket panel Life 25,000 cycles circuit dependent seal 50,000 cycles circuit dependent Operating Temperature Up to 85 C consult factory for applicable Consult Factory for Specific Applications circuits. Contact Fine silver, silver cad-oxide Mounting 1.190 30.22 Terminals Brass or copper/silver plate 1/4 (6.3mm) Quick Connect .680 17.27 terminations standard. MOUNTING HOLE Solder lug - Brass Tin Plated (Nylon Snap-in Brackets) .830 21.08 Wire Lead 16 gauge standard 105C Panel Thickness: .040 min. - .250 max. 600VAC Screw Terminals - Brass 55 - 4 places 1.450 36.83 *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. Agency Certifications UL, CSA and VDE Select circuits and constructions with VDE/IEC approvals are available. Consult factory 2. *Manufacturer reserves the right to change product specification without prior notice.