Smart Dupline Input/Output Module Type BDB-IOCP8x-U Light switch for building automation application 4 contact inputs for pushbuttons 4 contact outputs for LED with voltage up to 8.0 V Input pulse prolongation Compact housing Bus supplied Low current consumption Product Description Ordering Key BDB IOCP8 A U The BDB-IOCP8 is an switch/push buttons in input/output module to be building automation installa- Decentral module connected to PNP transistor tions. It is part of the smart- Input outputs and contact inputs. house concept and can be Output It offers a flexible installation used with all the functions Connection concept to integrate a supported by the smart- PNP smart-house system with house controller. Number of inputs and outputs already existing light 8.0 V output voltage Smart Dupline Type Selection Input Outputs Output voltage Bus supplied 4 4 PNP 3.3 V BDB-IOCP8-U 4 4 PNP 8.0 V BDB-IOCP8A-U Input Specifications Output Specifications Inputs 4 contacts Outputs 4 PNP Input current, each channel 0.1 mA Load, each channel Max. 1.5 mA Input pulse prolongation min. 272 ms Output voltage Cable length 0.2 m IOCP8 3.3 V Dielectric voltage IOCP8A 8.0 V Inputs - Dupline None Cable length 0.2 m Dupline Specifications Supply Specifications Voltage 8.2 V Power supply Supplied by Dupline bus Maximum Dupline voltage 10 V Minimum Dupline voltage 5.5 V Maximum Dupline current 10 mA Specifications are subject to change without notice (17.12.2013) 1BDB-IOCP8x-U General Specifications Address assignments / Weight 15 g channel programming If it is used with the Approvals cULus, according to UL60950 SH2WEB24 the address CE Marking Yes assignment is automatic: EMC the controller recognises Immunity EN 61000-6-2 the module through the SIN - Electrostatic discharge EN 61000-4-2 (Specific Identification - Radiated radiofrequency EN 61000-4-3 Number) that has to be - Burst immunity EN 61000-4-4 inserted in the SH tool. - Surge EN 61000-4-5 If it is used with the BH8- - Conducted radio frequency EN 61000-4-6 CTRL-230, the channels - Power frequency magnetic have to be programmed by fields EN 61000-4-8 the BGP-COD-BAT. - Voltage dips, variations, Environment interruptions EN 61000-4-11 Operating temperature 0 to +50C (+32 to 122F) Emission EN 61000-6-3 Storage temperature -20 to +70C (-4 to 158F) - Conducted and radiated Humidity (non-condensing) 20 to 80% RH emissions CISPR 22 (EN55022), cl. B Connection - Conducted emissions CISPR 16-2-1 (EN55016-2-1) Max. size of wire in - Radiated emissions CISPR 16-2-3 (EN55016-2-3) 2 Dupline terminals 1.5 mm Housing Dimensions (h x w x d) 28 x 28 x 10 mm Material Noryl GFN 1, Black Mode of Operation The BDB-IOCP8x-U is fully BDB-IOCP8x-U connected to insert the SIN number in BDB-IOCP8x-U connected programmable via the SH to the SH2WEB24 the SH tool when creating to the BH8-CTRLX-230 tool: each input and each the system configuration. output can be individually Coding/Addressing Used channels: 4 input Coding/Addressing associated to one or more If the input/output module is channels, 4 output channels. If the input module is con- functions supported by the connected to the nected to the BH8-CTRLX- smart-house system. SH2WEB24 controller, no 230 controller, the user has addressing is needed since to program the dupline the module is provided with channels using the BGP- a specific identification num- COD-BAT: this module has 4 ber (SIN): the user has only input and 4 output channels. Wiring Diagrams D+ D- COM Load COM, Black O4 Output 4, Yellow Input 1, Brown I1 O1 Load Output 3, Orange Input 2, Red I2 O1 Load Output 2, Red Input 3, Orange I3 O1 Load Output 1, Brown Input 4, Yellow I4 COM COM, Black 2 Specifications are subject to change without notice (17.12.2013)