Photoelectrics Diffuse-reflective Type PD30CND10....RT Miniature sensor range Range: 1 m Sensitivity adjustment by Teach-In programming Modulated, red light 660 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make or break switching function programmable LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Remote teach features Product Description Ordering Key PD30CND10PPM5RT The PD30CND10 sensor The Teach-In function for Type family comes in a compact adjustment of the sensitivi- Housing style 10 x 30 x 20 mm reinforced ty makes the sensors highly Housing size PMMA/ABS housing. flexible. The output type is Housing material The sensors are useful in preset (NPN or PNP), and the Housing length applications where high-ac- output switching function is Detection principle curacy detection as well as NO or NC output. Sensing distance small size is required. A remote teach feature Output type Compact housing and high allows the sensor to be set Output configuration power LED for excellent up from e.g. a PLC. Connection type performance-size ratio. Remote teach Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D S NPN PNP n Make or break switching Make or break switching 10 x 30 x 20 mm 1 m Cable PD 30 CND 10 NPRT PD 30 CND 10 PPRT 10 x 30 x 20 mm 1 m Plug PD 30 CND 10 NPM5RT PD 30 CND 10 PPM5RT Specifications EN 60947-5-2 Rated operating distance (S ) Up to 1 m, Light source GaAlAs, LED, 660 nm n referece target Kodak test Light type Red, modulated card R27, white, 90% Sensing angle 2 reflective, 200 x 200 mm Ambient light 10,000 lux Light spot 110 mm 1.5 m Blind zone 20 mm Operating frequency 1000 Hz Sensitivity Adjustable by Teach-In Response time Temperature drift 0.1%/C OFF-ON (t ) 0.5 ms ON Hysteresis (H) ON-OFF (t ) 0.5 ms OFF (differential travel) 10% Power ON delay (t ) 300 ms v Rated operational volt. (U ) 10 to 30 VDC B Output function (ripple included) NPN and PNP Preset Ripple (U ) 10% rpp NO/NC switching function Set up by button Output current Remote teach function Continuous (I ) 100 mA e Teach on 0 to 2.5 VDC (NPN) Short-time (I) 100 mA 5 to 30 VDC (PNP) (max. load capacity 100 nF) Tamper proof When activated more than No load supply current (I ) 30 mA 24 VDC o 20 sec., the sensor goes into Minimum operational current (I ) 0.5 mA m a tamper proof mode. OFF-state current (I ) 100 A r Indication Voltage drop (U ) 2.4 VDC 100 mA d Output ON LED, yellow Signal stability ON and power ON LED, green Protection Short-circuit, reverse polarity and transients Specifications are subject to change without notice (05.07.2016) 1 PD30CND10....RT Specifications (cont.) EN 60947-5-2 Environment Rated insulation voltage 500 VAC (rms) Installation category III (IEC 60664/60664A Housing material 60947-1) Body ABS Pollution degree 3 (IEC 60664/60664A Front material PMMA, red 60947-1) Connection Degree of protection IP 67 (IEC 60529 60947-1) Cable PVC, black, 2 m 2 Ambient temperature 4 x 0.14 mm , = 3.3 mm Operating -25 to +55C (-13 to +131F) Plug M8, 4-pin (CON. 54-series) Storage -40 to +70C (-40 to +158F) Weight With cable: 40 g Vibration 10 to 55 Hz, 0.5 mm/7.5 g With plug: 10 g (IEC 60068-2-6) CE-marking Yes Shock 30 g / 11ms, 3 pos, 3 neg Approvals cULus (UL508) per axis (IEC 60068-2-6, 60068-2-32) Operation Diagram Operation Diagram tv = Power ON delay ON Power supply OFF Present Object Not Present Tv ON Make Output (N.O.) OFF Tv ON Break Output (N.C.) OFF Wiring Diagrams NPN PNP 1 BN V 1 BN V 4 BK 2 WH Remote teach 2 WH 4 BK Remote teach 3 BU 3 BU V (GND) V (GND) Remote teach input Remote teach input active when connected active when connected to GND to V+ Detection Diagram Excess Gain 1,000 40 30 20 100 10 0 -10 -20 10 -30 -40 0 200 400 600 800 1000 1200 1400 1 Distance (mm) 10 100 1,000 10,000 Distance (cm) 2 Specifications are subject to change without notice (05.07.2016) (mm) Exess gain