Photoelectrics Retro-reflective, Industrial Door Market Type PD86, Polarized, Relay Output, Mute Input Range: 12 m ER 4 (15 m ER100) Modulated, visible light, polarized Make or break switching function, selectable by DIP-switch Active high or active low mute function (switch selectable) LED-indication for target detected and power Multi supply voltage: 12-24 VDC/VAC, 50/60 Hz 86 x 44 x 39 mm reinforced PC/ABS-housing, IP 66 SPST relay output High EMC and ambient light immunity CE, UL325 and UL508 approved UL325 UL508 Product Des crip tion Ordering Key PD86CNP12QPMU Type The PD86 is a powerfull polar- will influence on the sensing Housing style ized retro reflective sensor. distance. The sensor is made Housing size The sensor is designed to of a strong glass reinforced Housing material meet the harsh requirements PC housing. Not used in industrial door and gate With the mute input, the Detection principle environments. With a sensing sensor ful fills European and Sensing distance distance of 12 m, the sensor is North American regulations Supply voltage useful in applications where for industrial doors. Output Function dust and weather conditions Mute function Type Selection Housing Range Ordering no. W x H x D (S ) n 86 x 44 x 39 mm 12 m PD86CNP12QPMU Specifications Rated operating dist. (S ) 12 m ER4 ref. target Dielectric voltage 1,000 VAC (rms) n (0 to 5,000 lux) (cont./supply) Blind zone 0.15 m Light source GaAlAs, LED, 660 nm Sensitivity Fixed Light type Visible, modulated Temperature drift 0.6 %/C Optical angle 1.5 Differential travel (H) Light spot size 280 mm at 4 m Hysteresis 3 to 20% Ambient light Max. 5,000 lux Rated operational volt. (U ) 12-24 VDC, - 15% +20% B Operating frequency 20 Hz AC: 45 to 65 Hz 12-24 VAC, - 15% +20% Response time (object related) Rated operational power OFF-ON (t ) 20 ms ON (Relay ON) 12 VAC 648 mW ON-OFF (t ) 30 ms OFF 24 VAC 1680 mW Power ON delay (t ) 300 ms (typ. 100 ms) v 12 VDC 324 mW DIP-switch Selectable functions 24 VDC 840 mW Mute input active high or active low Output Relay output NO (make) or NC (break) Contact ratings (AgCdO) (micro gap) Mute function Resistive loads AC 1 0.5 A/30 VAC Active high 12 VDC/VAC DC 1 1 A/30 VDC Response time < 45 ms Small inductive loads AC 15 0.5 A/50 VAC Hold time < 70 ms DC 13 1 A/30 VDC Active low < 6 VDC/VAC Mechanical life (typical) 1,000 000 cycles Response time < 70 ms Electrical life (typical) > 100,000 AC11 or DC11 Hold time < 45 ms 1,800 operations per hour Max current 35 mA 24 VDC Minimum load power 1 mW 70 mA 24 VAC Specifications are subject to change without notice (19.01.2012) 1PD86 Specifications (cont.) Indication Rated insulation voltage 250 VAC (rms) Target detected LED, yellow Housing material Power LED, green Outer cover PC, grey Signal LED, green Inner cover PMMA, red Environment Backpart ABS, black Overvoltage category III (IEC 60664/60664A Cable outlet Kraiburg TC5MLZ or TP5VCZ 60947-1) Connection Pollution degree 3 (IEC 60664/60664A 2 Screw terminal 6 x 1.5 mm terminal block 60947-1) One entry for cable 3 to 6.5 mm Degree of protection IP 66 (IEC 60529 60947-1) Weight 110 g Temperature UL-Approval UL325, UL508 Operating -25 to +60C (-76 to +140F) CE-marking Yes Stor age -35 to +80C (-31 to +176F) EN12453, EN12445, Vibration 10 to 150 Hz, 0.5 mm/7.5 g EN12978 (IEC 60068-2-6) Shock 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) Wiring Diagram Green LED Power ON and signal stability Yellow LED Receiver Operation indicator Emitter Dipswitches Wiring 1-2: Mute input 6 5 4 3 2 1 1 NO NC 3-4: Output relay Active low 5-6: AC/DC power supply Active high 2 Operation Diagram tv = Power ON delay Power supply Target present Object present Mute (Active high) Mute (Active low) Output NO Mute function t v active Output NC t v 2 Specifications are subject to change without notice (19.01.2012) ON 1 2