Photoelectrics Through-beam, Transistor Output Type PE12CNT15.. Elevators, Escalators and Entrance control Range 15 m ESPE-Type 2, PL C. Modulated, infrared light Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP type Make or break switching LED for output indication or power supply Protection: reverse polarity, short circuit, transients Cable versions with or without connector Emitter mute and power adjustment CE, UL325 and UL508 approved Product Description Ordering Key PE12CNT15NO-C2 Type The PE12CNT. is a family of housing can be mounted Housing style general purpose Photoelec- with a wall thickness from Housing size tric sensors. 0.6 mm to 2.25 mm. The Housing material They are specially designed emitter has a mute input to Sensor code for Elevators, Escalators, turn it off for evaluation of Detection principle Entrance control to meet the sensor function. Sensing distance the requirements in the Available in 10-30 VDC Output type door market. The snap-on version. Output configuration Connection type Cable connector Type Selection Housing Range Con- Ordering no. Ordering no. Ordering no. Ordering no. Ordering no. diameter S nec- Receiver Receiver Receiver Receiver Emitter n tor NPN, NO NPN, NC PNP, NO PNP, NC 12 mm 15 m NO PE12CNT15NO PE12CNT15NC PE12CNT15PO PE12CNT15PC PE12CNT15 12 mm 15 m YES PE12CNT15NO-C2 PE12CNT15NC-C2 PE12CNT15PO-C2 PE12CNT15PC-C2 PE12CNT15-C2 Note: Please order emitter and receiver separately Specifications Emitter Rated operational volt. (U ) 10 to 30 VDC Light type Infrared, modulated B Ripple (U ) 10% Light spot 940 mm 9 m rrp Supply current 20 mA Emitter angle 3 9 m Protection Reverse polarity, transients Indication function Power supply ON LED, green Power ON delay (t ) 100 ms v Mute input ON LED, green flashing 3.5 Hz Control input Power adjustment Normal oper. > 1.5 VDC R ~ 3 k -10 k 3 ... 18 m in 19 step x Mute < 1.2 VDC Light source LED, 890 nm Specifications are subject to change without notice. Rev. *1* (28.04.2017) 1 PE12 Specifications Receiver Rated operating dist. (S ) 15 m Utility category DC12 Control of resistive loads n and solid state loads with Blind zone None optical isolation Temperature drift 0.4 %/C DC13 Control of electromagnets Hysteresis (H) 3 - 20 % Ambient light Rated operational volt. (U ) 10 to 30 VDC (ripple included) B 3,000 ... 3,200 K > 80,000 LUX (EN60947-5-2) Ripple (U ) 10 % rrp Detection angle 2.5 9 m No load supply current (I ) 16 mA o Operating frequency (f) 100 Hz Output current Response time OFF-ON (t ) 6.5 ms ON Continuous (I ) 100 mA e ON-OFF (t ) 3.5 ms OFF Short-time (I) 100 mA, Power ON delay (t ) 100 ms v (max. load capacity 100 nF) Output function Minimum operational current (I ) 0.5 mA m NPN or PNP Make or break (NO or NC) OFF-state current (I ) 100 A r Indication function Voltage drop (U ) 1.6 VDC 100 mA d Output ON LED, yellow Protection Short-circuit, reverse pola- rity, transients General Specifications Environment Surge (EN 61000-4-5) Overvoltage category IIl (IEC 60664/60664A, Power-supply > 1 kV (with 500 ) 60947-1) Sensor output > 1 kV (with 500 ) Pollution degree 3 (IEC 60664/60664A, Wire conducted disturbances 60947-1) (EN 61000-4-6) > 10 Vrms Degree of protection IP67 (IEC 60529 EN60947-1) Power-frequency magnetic 1, 2, 12 (NEMA types) fields (EN 61000-4-8) Temperature Continous > 30 A/m, 38 tesla Operating -20 to +50C (-4 to +122F) Short-time > 300 A/m, 380 tesla Storage -25 to +80C (-13 to +176F) Vibration (IEC 60068-2-6) 10 to 150 Hz, 1 mm / 15 g Rated insulation voltage 75 VDC Shock (IEC 60068-2-27) 30 g / 11 ms, 6 pos, 6 neg Dielectric test voltage 500 Vac rms (EN60947-1) per axis Rated impulse withstand test 800 V (1.2 / 50 s) (EN60947-1) Free fall (IEC 60068-2-31) 2 times from 1 m, ESPE Type 2 100 times from 0.5 m -8 PFHd 6 x 10 failure per hour Pig-tail connector (-C2) 3-pol micro MATE-N-LOK (worst case SRP for CS) Series, AMP/TE Diagnostic coverage 99 % (EN13849-1: 2008) Housing material Body PE12 PC black Performance level C (EN13849-1: 2008) Front glass PC black MTTF (worst case full sensor) 298 Years d Connection (worst case full receiver) Cable PVC, Emitter: grey / EN ISO 13849-1, SN 29500 Receiver: black, 368 Years 2 5 m, 3 x 0.14 mm , 2.9 mm (worst case full emitter) EN ISO 13849-1, SN 29500 Weight Emitter 80 g Electrostatic discharge Receiver 80 g (EN61000-4-2) Contact discharge > 12 kV CE-marking EN12445, EN12453, Air discharge > 8 kV EN12978, EN 60947-5-2 Radiated RF electromagnetic UL-Approval UL325 fields (EN 61000-4-3) > 10 V/m UL508, CSA-C22.2 No.247 Electrical fast transients/burst (EN 61000-4-4) 4 kV 2 Specifications are subject to change without notice. Rev. *1* (28.04.2017)