Conductive Sensors Level Probes Types VN, VNY, VPC, VPP 1 to 4 electrodes Isolated or unisolated electrodes Cable or screw connection 1/2, 1 or 1 1/2 without pipe thread according to ISO 228/1-Gxxx VN VNY VPC/VPP Product Description Ordering Key VPC 110 Level sensor for measur- by the amplifier relay used. Type Housing material ing the level of conductive The sensors are delivered Number of electrodes li quids, i.e. max./min. control with standard length elec- Thread of charging or discharging. trodes - these are cut off to The function is determined suit the application. Type Selection Pipe thread Electrode Housing Ordering no. Ordering no. Ordering no. Ordering no. isolation Material 1 electrode 2 electrodes 3 electrodes 4 electrodes 1 1/2 No Nylon 6 VN 1 VN 2 VN 3 VN 4 1 1/2 No Nylon 6 VNY 1 VNY 2 VNY 3 VNY 4 1 1/2 Polyethylene Nylon 6 VNI 1 VNI 2 VNI 3 VNI 4 1 1/2 Polyethylene Nylon 6 VNYI 1 VNYI 2 VNYI 3 VNYI 4 1/2 Polyethylene PVC VPC 105 VPC 205 1 Polyethylene PVC VPC 110 VPC 210 VPC 310 1/2 Kynar (PVDF) Polypropylene VPP 105 VPP 205 1 Kynar (PVDF) Polypropylene VPP 110 VPP 210 VPP 310 Specifications Electrodes Environment Material Stainless steel Degree of protection IP 67 AISI316/DIN1.4401 Operating temperature Standard length VN, VNY 0 to 90C (32 to 194 F) VN, VNY 100 cm VPC 0 to 60C (32 to 140 F) VPC, VPP 50 cm VPP 0 to 100C (32 to 212 F) Diameter Storage temperature VN, VNY 5 mm VN, VNY -25 to 100C (-13 to 212F) VPC, VPP 4 mm VPC, VPP -20 to 110C (-40 to 230F) Pressure Housing VN, VNY, VPP 10 bar at 60C Connection VPC 2 bar at 60C VN Cable (PVC), 2 m VNY, VPC, VPP Screw terminals CE marking IEC 529 Specifications are subject to change without notice (28.10.2014) 1 57 PG9 Pipe thread ISO 228/1-G 1 1/2 Pipe thread ISO 228/1-G 1 4 57 PG9 Pipe thread ISO 228/1-G 1 1/2 Pipe thread ISO 228/1-G 1/2 4 VN, VNY, VPC, VPP Accessories Mode of Operation Extension joint for 5 mm The length of the elec- S195/196, S1961, ELA, ELC electrodes (VN/VNI): VD1 trodes determines the levels or ELD). If the container is which will be detected and made of a conductive mate- the amplifier chosen deter- rial this can be used as com- mines the function (see SV..., mon electrode. Dimensions VN VNY 40 40 500 76.0 500 76.0 SW 36 SW 36 20 56.0 20 56.0 21 21 VPC05, VPP05 VPC10, VPP10 Wiring Diagrams BK BK BK BU BK BN WH GY BU BN GY VN/VNI 1 VN/VNI 2 VN/VNI 3 VN/VNI 4 2 Specifications are subject to change without notice (28.10.2014)