SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125 TM AIchip -MHKSeries Endurance : 2,000 hours at 125 Specified ESR after endurance MHK For automobile modules and other high temperature applications Lower ESR Solvent resistant type (see PRECAUTIONS AND GUIDELINES) MHJ P126 RoHS Compliant AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. SPECIFICATIONS Items Characteristics Category -40 to +125 Temperature Range Rated Voltage Range 35Vdc Capacitance Tolerance 20%(M) (at 20, 120Hz) Leakage Current I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minute) Dissipation Factor Rated voltage(V ) 35V dc (tan ) tan (Max.) 0.14 (at 20 , 120Hz) Low Temperature Rated voltage(Vdc) 35V Characteristics Z(-25)/Z(+20) 2 (Max. impedance Ratio) Z(-40)/Z(+20) 3 (at 120Hz) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 125. Capacitance change 30% of the initial value D.F. (tan ) 300% of the initial specied value Leakage current The initial specied value ESR max./-40, 400kHz 6.0 Shelf life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specied value Leakage current The initial specied value DIMENSIONS mm Terminal Code : A Size code : F80 W 0.3max. A0.2 L0.3 Size code D L A B C W P F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MHK 3 5 0 A DA M F 8 0 G MARKING Supplement code EX) 35V47F Size code Rated voltage symbol Capacitance tolerance code Rated voltage (Vdc) Symbol 3A Capacitance code (ex. 47F:470,100F:101) 35 V 47 Taping code HK V Terminal code Voltage code (ex.35V:350) Series code Category Please refer toProduct code guide (surface mount type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 128 CAT. No. E1001Q D0.5 B0.2 P C0.2SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125 TM AIchip - MHKSeries STANDARD RATINGS ESR WV Cap Rated ripple current max./100k to 400kHz) Size code Part No. (Vdc) (F) (mArms/125, 100k to 400kHz) 20 -40 47 F80 0.30 3.0 240 EMHK350ADA470MF80G 35 100 F80 0.30 3.0 240 EMHK350ADA101MF80G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) Capacitance(F) 120 1k 10k 100k 47 to 100 0.40 0.75 0.90 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 129 CAT. No. E1001Q