AJP16 CIF

CIRCUIT IMPRIM PRINTED CIRCUIT BOARD GLASS EPOXY,THICKNESS 16/10TH Size in mm Reference Single sided-Tinned copper clad strips. 100 x 160 AGB 10 Drilled at 2.54mm pitch. Drilling 1 mm. Gap between 160 x 200 AGB 20 tracks 0.54 mm.Width of tracks 2 mm over the whole 160 x 300 AGB 30 surface 160 x 510 AGB 58 Single sided Tinned copper clad strips Drilled at 2.54 mm pitch. Drilling 1 mm. Gap bet- ween tracks 0.54 mm.Width of tracks 2 mm over the whole surface Size in mm Reference 100 x 160 AG 615 AG 615 Single sided Tinned copper clad strips. Size in mm Reference Drilled at 2.54 mm pitch. Drilling 1 mm. Gap between 100 x 160 AG 605 tracks 0.54 mm.Width of tracks 2 mm over the whole surface.With DIN 41612 connector. AG 605 Size in mm Reference Single sided Tinned copper clad pads. 100 x 160 AGP 10 Drilled at 2.54 mm pitch. Drilling 1mm.Width of 100 x 200 AGP 12 tracks 2 mm over the whole surface. Gap of 0.54 160 x 200 AGP 20 mm over the whole surface. 160 x 300 AGP 30 200 x 360 AGP 26 E 160 x 510 AGP 58 1 side Single sided Tinned copper clad pads. Size in mm Reference Drilled at 2.54mm pitch. Drilling 1mm. Square pads 100 x 160 AG 601 with 2mm sides. Gap of 0.54 mm over the whole sur- 160 x 233,5 AG 601 B face. 2.54mm pitch plug-in connector. 2 sides As AG601 and AG601B but double sided. Size in mm Reference 100 x 160 AG 621 160 x 233,5 AG 621 B 1 side Single sided Tinned copper clad pads. Size in mm Reference Drilled at 2.54 mm pitch. Drilling 1 mm. Square 100 x 160 AG 611 pads with 2mm sides. Gap of 0.54 mm over the 160 x 233,5 AG 611 B whole surface. DIN 41612 connector. 2 sides As AG611 and AG611B but double sided. Size in mm Reference 100 x 160 AG 631 160 x 233,5 AG 631 B EPOXY,THICKNESS 16/10TH Double sided plated holes Drilled at 2.54 mm pitch. Drilling 1 mm. Square pads with 2 mm sides. DIN 41612 connector. Size in mm Reference 100 x 160 AL 106 160 x 233 AL 103 AL 106 AL 103 BAKELITE THICKNESS 15/10TH Size in mm Reference Single sided 35 Tinned copper clad Strips Pads strips or pads. 50 x 100 AJB 5 AJP 5 Drilled at 2.54 mm pitch. Drilling 1 mm. Gap bet- 580 100 x 100 AJB 10 AJP 10 ween tracks 0.54 mm.Width of tracks 2 mm over 100 x 150 AJB 15 AJP 15 the whole surface. 100 x 160 AJB 16 AJP 16 100 x 200 AJB 20 AJP 20 100 x 580 AJB 58 AJP 58 Specifications are subject to change without prior notice. www.cif.fr 100 100X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for cif manufacturer: Other Similar products are found below : AJB58 V900130 AL441 DU68.10 AAC20 AD20 V900131 V900132 AN10 DU64.10 V900121 ABC16 AAC16 DU80 DU67 AEB16 AB15 AR224 DW101010 AEB20 AGP20 AJP20 AA20 DU77 DU71 AJP58 AGP30 AA15 ABB16 DU66 AGB30 DU65.10 ADB16 AR234 AL435 DU69 AAT10 DU85 ADB20 AR45 AE20 AAB16 AB16 AD16 AJB22 AJP22 AGB10 AR412 AR21 AJP16