CBM100S240 Cincon

V15 CBM100S SERIES 100 WATT AC-DC POWER SUPPLY WITH PFC Features * Universal Input Range 90~264Vac * Full Load with Baseplate Cooled and No Fan Required * Wide Operating Temperature Range * 17mm Ultra Low Profile Package * Safety Meets EN60950-1 * Built-in EN55032 Class B Filter * Active PFC Meets EN61000-3-2 * High Efficiency up to 91% Typical * No Load Input Power Consumption <0.5W * Over Temperature Protection * Over Voltage Protection * Over Current Protection RIPPLE VOLTAGE LINE LOAD % EFF. VOLTAGE OUTPUT MODEL & NOISE ACCURACY REG. REG. (Typ.) OUTPUT CURRENT NOTE1 NOTE2 NOTE3 NOTE4 NOTE5 +12 V 8.4 A 1.0% 1.0% 0.5% 1% 90% CBM100S120 +24 V 4.2 A 1.0% 1.0% 0.5% 1% 91% CBM100S240 +28 V 3.6 A 1.0% 1.0% 0.5% 1% 91% CBM100S280 CBM100S360 +36 V 2.8 A 1.0% 1.0% 0.5% 1% 91% +48 V 2.1 A 1.0% 1.0% 0.5% 1% 90.5% CBM100S480 1 V15 Specifications CBM100S Series Derating Curve INPUT SPECIFICATIONS: Voltage ................................................... 90~264Vac 120~370Vdc Frequency ...... 47 to 63Hz Inrush Current ........................ 100A max. 240Vac Leakage Current 264Vac ... 3.5mA max. OUTPUT SPECIFICATIONS: Isolation ... Input to output = 4242VDC Total Rated Output Power 100W Hold-up Time . 12ms typ. Over Voltage Protection ... Recycle AC input to restart Short Circuit Protection ....... Hiccup mode(Auto Recovery) Over Current Protection .... Auto Recovery Over Temperature Protection .... Auto Recovery Temperature Coefficient .... 0.05%/ GENERAL SPECIFICATIONS: Operating Ambient Temperature ............... -20~+85(see derating curve) Operating Case Temperature ............................................. +85 max. Storage Temperature ................. -40~100 Humidity ............ 93% RH max. Non condensing Switching Frequency ....................................... 130KHz Typical MTBF ... MIL-HDBK-217F, GB, 25/115VAC . 100Khrs min. No Load Input Power Consumption............<0.5W Altitude 2000m NOTE: Dimensions.........................4.60x2.40x0.67 inches (116.8x61.0x17.0mm) 1. CBM100S Series: Add a 0.1uF ceramic capacitor and a 10uF E.L. W eight ..236g(0.52Pounds) capacitor to output for ripple&noise measuring 20MHz BW. 2. Voltage accuracy is set at 60% rated load. SAFETY AND EMC: Emission and Immunity . EN55032 Class B, FCC Part 15 Class B 3. Line regulation is measured from High Line to Low Line with rated load. EN61000-6-3, EN61000-3-2, EN61000-3-3 4. Load regulation is measured at 60%40% rated. EN55024, EN61000-6-1, EN61204-3 5. Typical efficiency with 230Vac and full load at 25 6. Power dissipation (P ): P =P -P =P (1-)/ Safety .. IEC60950-1, EN60950-1, UL60950-1 d d i o o Mechanical Specification All Dimensions In Inches mm Tolerance Inches:x.xx = 0.02 , x.xxx= 0.010 Millimeters:x.x = 0.5, x.xx0.25 4.20 106.7 0.20 5.1 AC/L +Vout AC/N -Vout FG 4-M3x0.5 Through 4.20 106.7 4.60 116.8 Typical at 25, 230Vac and 75% rated load, unless otherwise Specified 2 2.40 61.0 2.00 50.8 0.67 17.0 0.400 10.16 0.400 10.16 0.23 5.9 0.30 7.6 0.30 7.6