CFM21M240-T

V13 CFM21M SERIES 20 WATT SINGLE OUTPUT AC-DC MODULES Features * Universal Input Range 90~264VAC * Class II * Miniature Size Low Profile 0.8 * Industry-Standard Pin Out * Efficiency to 86% * Option for On-Board, Connecter, Screw Terminal or Encapsulated type * Continuous Short Circuit Protection * Over Voltage Protection * No Load Input Power < 0.1W * Leakage Current < 100uA * UL60601-1/IEC60601-1/EN60601-1 Ed.3.1 Medical Safety Approved * 2 MOPP * Peak Load 130% (note 8) * Meet UL62368/IEC62368/EN62368 * Meet UL60335-1/IEC60335-1/EN60335-1 VOLTAGE LINE LOAD RIPPLE & OUTPUT OUTPUT OUTPUT % NOISE REGULATION REGULATION MODEL CURREN ACCURACY RATED EFF. VOLTAGE T NOTE 1 NOTE 3 NOTE 4 POWER NOTE 2 CFM21M050 5.0 V 4.0 A 50 mV 1% 0.5% 1.0% 20.0 W 81% 20.7 W 83% CFM21M090 9.0 V 2.3 A 90 mV 1% 0.5% 1.0% CFM21M120 12 V 1.7 A 100 mV 1% 0.5% 1.0% 20.4 W 85% CFM21M150 15 V 1.4 A 100 mV 1% 0.5% 1.0% 21.0 W 85% 21.6 W 86% CFM21M240 24 V 0.9 A 100 mV 1% 0.5% 1.0% Specifications are subject to change without notice. 1 4-0.138 3.50 V13 Specifications CFM21M Series De-rating Curve INPUT SPECIFICATIONS: Voltage ....................................................... 90~264Vac Derating curve for Natural Convection Frequency ...... 47 to 63Hz 120% 50 60 Input Current ...... 0.3 to 0.5A 100% Inrush Current . Cold Start 25 ............. 40A max. 230Vac 80% Leakage Current 70uA Typical - 100uA max. CFM21 Series OUTPUT SPECIFICATIONS: 60% CFM21M050, Isolation Input to Output = 4000VAC CFM21M090 40% Hold-up Time ... 10ms typ. 115Vac Short Circuit Protection .. Continuous 20% Over Voltage Protection (TVS) . 110%-140% of Nominal Output Voltage 70 0% GENERAL SPECIFICATIONS: -25 -15 -5 5 15 25 35 45 55 65 75 o Ambient Temperature( C) Efficiency .. See Table Switching Frequency .... 65KHz typ. Operating Temperature ...................................... -25 ~ 70 (with De-Rating) NOTE: Storage Temperature .................. -40~85 1. Add a 0.1Uf ceramic capacitor and a 10Uf E.L. capacitor to output for Cooling . Natural Convection ripple&noise measuring 20MHz BW. Humidity ...................................................... 93% RH max. Non Condensing 2. Voltage accuracy is set of 100% rated load. Operating Altitude.......................................................................... 5000m 3. Line regulation is measured from high line to low line with full load. MTBF .. MIL-HDBK-217F, GB ... 500Khrs min. 4. Load regulation is measured from 10% to 100% full load. Dimensions ............ 2.38x1.60x0.80inches (60.5x40.6x20.4mm) 5. T Version Connection: JST B3P-VH / B4P-VH or equivalent. -T: 3.00x1.60x0.77inches (76.2x40.6x19.5mm) 6. S Version Connection: DECA MB332-381A or equivalent. -E: 2.53x1.74x0.80Inches (64.2x44.2x20.4mm) 7. Typical efficiency at 230VAC and 100% load at 25 . -S: 3.00x1.60x0.77Inches (76.2x40.6x19.5mm 8. Peak load 130% lasting < 10 seconds with a maximum duty cycle of Weight ... 55g, 60g (-T, -S), 110g(-E) 10% at nominal Line. SAFETY AND EMISSION: Emissions and Immunity (Ed. 4.0) . EN55011 Class B, EN61000-3-2(3) EN60601-1-2 2015, IEC 61000-4-2(3/4/5/6/8/11) Safety Approved (Ed.3.1) .................................................... IEC60601-1 ANSI/AAMI ES 60601-1:2005/A1:2012&C1:2009/2012&2010/2012 CAN/CSA-C22.2 NO. 60601-1:14, EN 60601-1: 2006+A11:2011+A1:2013, IEC 60601-1:2005+A1:2012 Mechanical Specification Annotations: For all models, height does not exceed 34mm max. CFM21MXXX CFM21MXXX-T -Vo ACN -Vo ACN -Vo +Vo ACL +Vo ACL +Vo 0.12 3.06 0.15 3.81 2.700 68.58 2.126 54.00 3.00 76.2 2.38 60.5 0.039 1.00 0.071 1.80 2 1.60 40.6 0.134 3.40 0.80 20.32 0.150 3.80 0.11 2.82 0.61 15.5 max 0.10 2.5 max 0.406 10.32 0.79 20.1 max 1.194 30.32 1.60 40.6 0.15 3.81 1.299 33.00 LOAD(%) 0.61 15.5 max 0.098 2.50 max 0.76 19.2 max