Web Sample Tools & Support Document 1289-1 page & buy software & FAQ SMT Data Line EMI Filters CDF See our PDLF series for 4, 3 and 2-line EMI filters AEC + Q200 85C Exceptional common mode noise attenuation from 15 MHz to 300 MHz passes signal line data below 300 MHz with minimal attenuation DC current capacity of 500 or 100 mA. Excellent electrical isolation 360 Vrms Core material Ferrite Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 330 345 mg Ambient temperature 40C to +85C Storage temperature Component: 40C to +85C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/13 reel Plastic tape: 16 mm wide, 0.46 mm thick, 12 mm pocket spacing, 4.5 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. Common mode Cutoff 2 4 5 6 Part peak impedance frequency Inductance DCR max Isolation Current 1 3 number Lines (kOhms) (GHz) min (H) (mOhms) (Vrms) (mAdc) CDF8000L 8 0.63 37 MHz 0.053 5.0 250 300 100 CDF8500L 8 0.52 42 MHz 0.053 5.0 180 300 500 CDF10000L 10 0.52 43 MHz 0.043 5.0 250 360 100 1. When ordering, please specify termination and packaging codes: Schematics CDF10000LD Termination L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. Special order: S = non-RoHS tin-lead (63/37). Packaging D = 13 machine ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D. 2. Frequency at which the differential mode attenuation equals 3 dB 3. Inductance shown for each winding, measured at 1 MHz 4. DCR is for each winding. 5. Interwinding isolation (hipot) tested for one minute. 6. Current rating is for each line. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 1289-1 Revised 07/19/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 1289-2 CDF Surface Mount Data Line EMI Filters Dimensions CDF8x00 Dimensions CDF10000 0.315 max 8,0 AEC + Q200 85C 0.315 max 8,0 16 1 Note: Location of the wire slots for parts manufactured prior to August 2017 may be different. 0.177 max 4,5 0.005/0,13 0.260 6,6 0.050 1 2 3 4 1,27 16 5 0.260 15 6 6,6 14 7 16 13 8 1 0.043 12 11 10 9 0.055 1,1 1,4 inches Recommended inches Dimensions are in Dimensions are in mm Land Pattern mm Document 1289-2 Revised 07/19/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. 8x00L