Document 284-1
SMT Power Inductors - DO5010H Series
Irms ratings up to 15 A; saturation currents up to 30 A
Heavy gauge wire for low DC resistance
Designers Kit C355 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 3.2 4.0 g
Ambient temperature 40C to +85C with Irms current, +85C to
+125C with derated current
Storage temperature Component: 40C to +125C.
Tape and reel packaging: 40C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250 per 13 reel Plastic tape: 32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR SRF 1. When ordering, please specify termination and packaging codes:
2 3 4 5
Inductance max typ Isat Irms
1
DO5010H-105MLD
Part Number 20% (H) (mOhm) (MHz) (A) (A)
Termination: L = RoHS compliant tin-silver over copper.
DO5010H-781ML_ 0.78 2.6 156 30 15
Special order: T = RoHS tin-silver-copper
DO5010H-152ML_ 1.5 4.0 100 25 15
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
DO5010H-222ML_ 2.2 6.1 75 20 12
Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic
DO5010H-332ML_ 3.3 8.6 60 17 10
tape.
DO5010H-392ML_ 3.9 10 55 15 9.0
B = Less than full reel. In tape, but not machine ready.
DO5010H-472ML_ 4.7 14 40 13 8.4
To have a leader and trailer added ($25 charge),
DO5010H-602ML_ 6.0 17 35 12 7.5 use code letter D instead.
DO5010H-782ML_ 7.8 18 35 11 7.5 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A
DO5010H-103ML_ 10 26 28 10 6.0 LCR meter or equivalent.
DO5010H-123ML_ 12 28 26 8.5 5.2 3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 10% (typ) from its value
DO5010H-153ML_ 15 32 20 8.0 4.4
without current.
DO5010H-223ML_ 22 47 20 7.0 3.5
5. Current that causes a 40C temperature rise from 25C ambient.
DO5010H-333ML_ 33 66 15 5.5 3.0
6. Electrical specifications at 25C.
DO5010H-473ML_ 47 86 9 4.5 2.6
Refer to Doc 362 Soldering Surface Mount Components before soldering.
DO5010H-683ML_ 68 130 8 3.5 2.3
DO5010H-104ML_ 100 190 7 3.0 1.8
DO5010H-154ML_ 150 250 6 2.6 1.5
DO5010H-224ML_ 220 380 5 2.4 1.2
DO5010H-334ML_ 330 560 4 1.9 1.0
DO5010H-474ML_ 470 850 3 1.4 0.82
DO5010H-684ML_ 680 1100 2.5 1.2 0.72
DO5010H-105ML_ 1000 1800 2.0 1.0 0.56
Document 284-1 Revised 02/25/15XXX
X
Document 284-2
SMT Power Inductors - DO5010H Series
Typical L vs Frequency Typical L vs Current
10000
10000
1000 H
1000 H
1000 1000
100 H
100 H
100
100
10 H
10 H
10
10
0.78 H
0.78 H
1 1
0.1
0.1
0.010.01 0.10.1 111100 0.1 1 10 100
Frequency (MHz) Current (A)
0.500
12,70
Note:
Irms Derating
Maximum height: 0.315
for -781 to -153
8,00
Note
0.300
for -223 to -683
7,62
0.280
for -104 to -105
0.730
7,11
max
18,54
0.561
min
14,25
0.075
1,90
0.250
0.600
max
6,35
15,24
0.626
0.200
max 15,90
5,08
0.065
max
1,65
Recommended
Land Pattern
0.710
max
18,03
Internal code Dash number
Part Marking
Part marking since Feb. 2005. Parts manufactured
inches
prior to that date mayhave color dots.
Dimensions are in
mm
Visit www.coilcraft.com/colrpowr.cfm
for color dot marking details.
Document 284-2 Revised 02/25/15
Inductance (H)
Inductance (H)