LPD3015-683MRB

Document 661-1 Shielded Coupled Inductors LPD3015 Halogen Only 1.4 mm high and 3 mm square Free Ideal for use in flyback, multi-output buck, SEPIC and Zeta applications. High inductance, high efficiency and excellent current handling AEC Can also be used as two single inductors connected in + Q200 85C series or parallel or as a common mode choke. + + D C V L1 L2 OUT C V IN SW Typical Flyback Converter + D V OUT C AUX L2 ++ L1 V V C OUT D IN SW 1 4 Typical Buck Converter with auxiliary output L1 L2 2 3 D ++ L1 C1 V C Q L2 C OUT V IN Typical SEPIC schematic ++ L2 C1 Q V D V CC OUT L1 IN Typical Zeta schematic inches Dimensions are in mm Specifications subject to change without notice. US +1-847-639-6400 sales coilcraft.com Document 661-1 Revised 12/22/21 US +1-847-639-6400 sales coilcraft.com Please check our website for latest information. UK +44-1236-730595 sales coilcraft-europe.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 Coilcraft Inc. 2021 This product may not be used in medical or high This product may not be used in medical or high TaiwanTaiwan +886-2-2264 3646 sales coilcraft.com.tw+886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice.Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 661-2 Coupled Inductors for SEPIC - LPD3015 Series 6 Isat (A) Irms (A) Coupling Leakage 2 3 4 5 Inductance DCR max SRF typ coefficient L typ 10% 20% 30% both one 1 7 8 Part number 20% (H) (Ohms) (MHz) typ (H) drop drop drop windings winding LPD3015-391MR 0.39 0.071 289 0.89 0.08 3.2 3.3 3.4 1.45 2.05 LPD3015-561MR 0.56 0.079 235 0.93 0.08 2.7 2.8 2.8 1.37 1.94 Halogen LPD3015-102MR 1.0 0.129 160 0.95 0.09 2.0 2.1 2.2 1.08 1.52 Free LPD3015-152MR 1.5 0.204 140 0.96 0.11 1.6 1.7 1.8 0.86 1.20 LPD3015-182MR 1.8 0.273 135 0.96 0.13 1.5 1.6 1.6 0.78 1.10 LPD3015-222MR 2.2 0.300 110 0.97 0.14 1.5 1.6 1.6 0.75 1.05 LPD3015-332MR 3.3 0.337 90 0.98 0.16 1.0 1.1 1.2 0.67 0.94 LPD3015-472MR 4.7 0.503 79 0.98 0.18 0.86 0.87 0.88 0.54 0.76 AEC + Q200 85C LPD3015-682MR 6.8 0.622 58 0.98 0.22 0.77 0.78 0.79 0.49 0.69 LPD3015-103MR 10 1.040 48 0.99 0.28 0.58 0.59 0.60 0.38 0.53 LPD3015-153MR 15 1.420 35 0.99 0.37 0.49 0.50 0.51 0.32 0.46 LPD3015-183MR 18 1.550 33 0.99 0.42 0.46 0.47 0.48 0.31 0.44 LPD3015-223MR 22 1.89 30 0.99 0.48 0.42 0.43 0.44 0.28 0.40 LPD3015-333MR 33 2.84 23 0.99 0.63 0.34 0.35 0.36 0.23 0.32 LPD3015-473MR 47 4.03 17 0.99 0.81 0.28 0.29 0.30 0.19 0.27 LPD3015-683MR 68 6.11 14 0.99 1.13 0.24 0.25 0.26 0.16 0.22 LPD3015-104MR 100 8.54 11 0.99 1.50 0.20 0.21 0.22 0.13 0.19 LPD3015-124MR 120 9.23 9.0 0.99 1.76 0.19 0.20 0.20 0.13 0.18 LPD3015-154MR 150 12.40 8.0 0.99 2.22 0.16 0.17 0.18 0.11 0.16 LPD3015-184MR 180 15.32 7.5 0.99 2.79 0.15 0.16 0.17 0.10 0.14 LPD3015-224MR 220 18.56 6.0 0.99 3.56 0.13 0.14 0.15 0.09 0.13 LPD3015-334MR 330 27.70 5.0 0.99 5.18 0.11 0.12 0.12 0.07 0.10 1. When ordering, please specify termination and packaging codes: Coupled Inductor Core and Winding Loss Calculator This web-based utility allows you to enter frequency, peak-to-peak LPD3015-334MRC (ripple) current, and Irms current to predict temperature rise and Termination: R = Matte tin over nickel over silver overall losses, including core loss. Go to online calculator. Special order, added cost: Q = RoHS tin-silver-cop- per (95.5/4/0.5) or P = non-RoHS tin-lead (63/37) Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic Core material Ferrite tape (1000 parts per full reel). Quantities less than Core and winding loss Go to online calculator full reel available: in tape (not machine ready) or Weight 45 52 mg with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part Terminations RoHS compliant matte tin over nickel over silver. numbering system, Coilcraft is eliminating the need Other terminations available at additional cost. for multiple packaging codes. When ordering, sim- Ambient temperature 40C to +85C with (40C rise) Irms current. ply change the last letter of your part number from Maximum part temperature +125C (ambient + temp rise). B to C. D = 13 machine-ready reel. EIA-481 embossed plastic Storage temperature Component: 40C to +125C. tape. Factory order only, not stocked (3500 parts Tape and reel packaging: 40C to +80C per full reel). Winding to winding isolation 100 Vrms, one minute 2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, Resistance to soldering heat Max three 40 second reflows at 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads +260C, parts cooled to room temperature between cycles are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value. Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) 3. DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, value. 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth 4. SRF measured using an Agilent/HP 4191A or equivalent. When leads Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm are connected in parallel, SRF is the same value. PCB washing Tested to MIL-STD-202 Method 215 plus an additional 5. Leakage Inductance is for L1 and is measured with L2 shorted aqueous wash. See Doc787 PCB Washing.pdf. 6. DC current at 25C that causes the specified inductance drop from its value without current. It is the sum of the current flowing in both windings. 7. Equal current when applied to each winding simultaneously that causes a 40C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Maximum current when applied to one winding that causes a 40C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 9. Electrical specifications at 25C. Refer to Doc 639 Selecting Coupled Inductors for SEPIC Applications. Refer to Doc 362 Soldering Surface Mount Components before soldering. Specifications subject to change without notice. Document 661-2 Revised 12/22/21 US +1-847-639-6400 sales coilcraft.com Please check our website for latest information. UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.