Web Sample Tools & Support Document 1244-1 page & buy software & FAQ Shielded Power Inductors High Inductance High inductance values (220 4700 H) not available in the corresponding LPS series of parts Rugged construction improves pick and place operation LPZ3010, LPZ3015, LPZ4012 and LPZ4018 are rated AEC-Q200 Grade 3 (40C to +85C) Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Ambient temperature 40C to +85C with Irms current Maximum part temperature +125C (ambient + temp rise) Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787 PCB Washing.pdf. 5 6 Isat (A) Irms (A) 2 3 4 Inductance DCR max SRF typ 1 Part number 20% (H) (Ohms) (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise LPZ3008-224MR 220 11.5 9.0 0.067 0.073 0.076 0.100 0.145 LPZ3008-334MR 330 18.0 7.0 0.059 0.064 0.066 0.090 0.130 LPZ3010-334MR 330 18.5 7.0 0.10 0.105 0.115 0.085 0.11 LPZ3015-334MR 330 23.0 5.0 0.10 0.11 0.11 0.070 0.095 LPZ3314-105MR 1000 31.0 3.0 0.090 0.099 0.100 0.082 0.100 LPZ3314-155MR 1500 44.0 2.7 0.080 0.086 0.090 0.060 0.080 LPZ4012-335MR 3300 65.0 0.95 0.074 0.078 0.080 0.050 0.065 LPZ4018-155MR 1500 25.0 2.4 0.095 0.10 0.105 0.080 0.11 LPZ4018-185MR 1800 31.5 2.3 0.090 0.095 0.10 0.070 0.095 LPZ4018-225MR 2200 32.5 2.1 0.088 0.094 0.10 0.070 0.090 LPZ4018-335MR 3300 48.0 1.6 0.082 0.092 0.094 0.055 0.075 LPZ4414-155MR 1500 26.4 2.2 0.096 0.099 0.10 0.085 0.11 LPZ4414-185MR 1800 35.0 1.9 0.089 0.094 0.097 0.075 0.10 LPZ4414-225MR 2200 42.5 1.9 0.082 0.089 0.092 0.065 0.080 LPZ4414-335MR 3300 56.0 1.3 0.072 0.078 0.083 0.055 0.070 LPZ5010-105MR 1000 28.0 3.0 0.087 0.096 0.10 0.080 0.11 LPZ5015-335MR 3300 55.0 1.7 0.064 0.072 0.076 0.055 0.075 LPZ5015-475MR 4700 80.0 1.4 0.062 0.069 0.072 0.045 0.065 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 1. When ordering, please specify termination and packaging codes: 3. DCR measured on a micro-ohmmeter. LPZ3008-334MRC 4. SRF measured using an Agilent/HP 8753ES or equivalent. Termination: R = RoHS compliant matte tin over nickel over silver. 5. DC current that causes the specified inductance drop from its value Special order, added cost: without current. Q = RoHS tin-silver-copper (95.5/4/0.5) or 6. Current that causes the specified temperature rise from 25C ambient. P = non-RoHS tin-lead (63/37). 7. Electrical specifications at 25C. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic Refer to Doc 362 Soldering Surface Mount Components before soldering. tape). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ( 25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked Document 1244-1 Revised 01/05/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 1244-2 Shielded Power Inductors LPZ3008 L vs Current L vs Frequency 1000 1000 800 800 700 700 600 600 500 500 400 400 330 H 330 H 300 300 220 H 220 H 200 200 100 100 0.0001 0.001 0.01 0.10 0.01 0.1 1 10 Current (A) Frequency (MHz) inches Dimensions are in mm Weight 22 25 mg Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm Document 1244-2 Revised 01/05/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)