SER1412-362MED Coilcraft

Web Sample Tools & Support Document 609-1 page & buy software & FAQ Shielded Power Inductors SER1400 Halogen Designed for high current power supply applications Free Flat wire windings provide exceptionally low DCR Specially formed terminations provide small footprint Isat ratings as high as 105.9 A Designers Kit C427 contains 3 each of all values AEC + Core material Ferrite Q200 125C SER1412 only Core and winding loss See www.coilcraft.com/coreloss Environment RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 40C to +165C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. High Isat for high peak current applications 5 6 Isat (A) Irms (A) SRF 2 3 3 4 Inductance DCR typ DCR max typ 10% 20% 30% 20C 40C Height max 1 Part number 20% (H) (mOhms) (mOhms) (MHz) drop drop drop rise rise (inches / mm) SER1412-301ME 0.30 1.30 1.43 154 87.0 92.8 105.9 30 37 0.498 / 12,66 SER1412-501ME 0.50 1.30 1.43 122 56.1 59.3 62.5 30 37 0.498 / 12,66 SER1412-681ME 0.68 1.30 1.43 100 41.2 43.5 45.8 30 37 0.498 / 12,66 SER1412-102ME 1.0 1.30 1.43 78 28.9 31.0 32.2 30 37 0.498 / 12,66 SER1412-152ME 1.5 1.30 1.43 62 21.8 23.6 24.6 30 37 0.498 / 12,66 SER1412-202ME 2.0 1.30 1.43 50 16.9 18.5 19.4 30 37 0.498 / 12,66 SER1412-362ME 3.6 1.30 1.43 35 9.6 11.2 12.1 30 37 0.498 / 12,66 Low DCR for high average current applications 5 6 Isat (A) Irms (A) DCR DCR SRF 2 3 3 4 Inductance typ max typ 10% 20% 30% 20C 40C Height max 1 Part number 20% (H) (mOhms) (mOhms) (MHz) drop drop drop rise rise (inches / mm) SER1408-301ME 0.30 0.48 0.55 140 43.2 49.6 53.0 38 42 0.325 / 8,26 SER1408-501ME 0.50 0.48 0.55 83 25.8 29.6 31.4 38 42 0.325 / 8,26 SER1408-681ME 0.68 0.48 0.55 63 18.8 21.6 23.2 38 42 0.325 / 8,26 SER1408-102ME 1.0 0.48 0.55 48 12.1 14.2 16.1 38 42 0.325 / 8,26 SER1410-152ME 1.5 0.90 0.99 53 16.8 18.9 20.3 33 39 0.416 / 10,56 SER1410-202ME 2.0 0.90 0.99 45 12.1 13.9 15.0 33 39 0.416 / 10,56 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 1. When ordering, please specify termination and packaging codes: 4263B LCR meter or equivalent. SER1410-202MED 3. DCR measured on a Keithley 580 micro-ohmmeter or equivalent. Termination: E = RoHS compliant tin-silver-over copper. 4. SRF measured using an Agilent/HP 4395A network analyzer and an Special order: T = RoHS tin-silver-copper over cop- Agilent/HP 16193A test fixture. per (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). 5. Typical dc current at 25C that causes the specified inductance drop from Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic its value without current. Click for temperature derating information. tape. Quantities less than full reel available: in 6. Typical current that causes the specified temperature rise from 25C tape (not machine ready) or with leader and trailer ambient. This information is for reference only and does not represent ( 25 charge). absolute maximum ratings. Click for temperature derating information. B = Less than full reel. In an effort to simplify our part 7. Electrical specifications at 25C. numbering system, Coilcraft is eliminating the Refer to Doc 362 Soldering Surface Mount Components before soldering. need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D. Document 609-1 Revised 12/02/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2020 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 609-2 Shielded Power Inductors SER1400 Series Halogen Free AEC + Q200 125C SER1412 only inches Dimensions are in mm Height max Series (inches/ mm) Weight SER1408 0.325 / 8,26 3.5 3.8 g SER1410 0.416 / 10,56 4.8 5.2 g SER1412 0.498 / 12,66 6.1 6.7 g Packaging SER1408 300/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 8.6 mm pocket depth SER1410 250/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 10.8 mm pocket depth SER1412 250/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 12.8 mm pocket depth Document 609-2 Revised 12/02/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2020 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.