Web Sample Tools & Support Document 991-1 page & buy software & FAQ Shielded Power Inductors XAL5020 Halogen High current and very low DCR Free Soft saturation makes them ideal for VRM/VRD applications. AEC-200 Grade 1 qualified (40C to +125C ambient) Core material Composite Environmental RoHS compliant, halogen free AEC + Terminations RoHS compliant tin-silver over copper. Other Q200 125C terminations available at additional cost. Weight 0.28 0.29 g Operating voltage: 0 55 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.2 mm thick, 8 mm pocket spacing, 2.16 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 6 2 4 5 DCR (mOhms) Irms (A) Inductance SRF typ Isat 1 Part number 20% (H) typ max (MHz) (A) 20C rise 40C rise Irms Testing XAL5020-161ME 0.16 4.11 5.00 205 24.2 13.9 18.8 Irms testing was performed on XAL5020-331ME 0.33 6.40 7.68 110 17.1 10.5 14.4 0.75 inch wide 0.25 inch thick XAL5020-561ME 0.56 8.30 9.54 80 14.1 9.9 13.9 copper traces in still air. XAL5020-801ME 0.80 10.3 11.8 64 12.0 9.4 13.0 Temperature rise is highly XAL5020-122ME 1.2 17.8 20.5 50 9.5 6.8 9.4 dependent on many factors including pcb land pattern, trace 1. When ordering, please specify packaging code: size, and proximity to other com- ponents. Therefore temperature XAL5020-122MEC rise should be verified in appli - Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). cation conditions. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ( 25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. These parts are preproduction products for electrical evaluation only. Document 991-1 Revised 11/02/18 US +1-847-639-6400 sales coilcraft.com Specification subject to change without notice. UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sgXXX Document 991-2 Shielded Power Inductors XAL5020 L vs Current L vs Frequency 0.24 0.20 Halogen 0.16 0.16 H Free 0.12 0.08 0.04 0 01510 5202530 AEC + Q200 125C Current (A) 0.48 0.36 0.33 H 0.24 0.12 0 02 46 8110 12 4 16 18 20 Current (A) 0.8 0.208 0.008 0.6 5,28 0,2 0.56 H 0.4 0.2 0.216 0.008 5,48 0,2 0 02 46 8110 12 4 16 18 Current (A) Dash Indicates start lead 1.2 number and orientation 1.0 of terminations 0.8 0.079 0.80 H 0.6 max* 2,00 0.4 0.039 0.002 0.165 0.2 typ See 1,0 0,05 4,2 table 0 0.091 0.010 02143658719 10 11 12 13 14 15 6 2,31 0.25 Terminal Current (A) Dash thickness (typ) 0.130 number (in / mm) 2.0 3,31 -161 0.0039 / 0.10 -331 0.0039 / 0.10 1.5 -561 0.0039 / 0.10 1.2 H -801 0.0039 / 0.10 0.185 1.0 -122 0.0028 / 0.07 4,70 * For optional tin-lead and tin-silver- 0.5 copper terminations, dimensions are for the mounted part. Dimensions 0 before mounting can be an 0.046 02143658719 10 112 additional 0.005 inch / 0.13 mm. 1,18 Current (A) Recommended inches Dimensions are in Land Pattern mm Document 991-2 Revised 11/02/18 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sg Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)