Web Sample Tools & Support Document 791-1 page & buy software & FAQ Shielded Power Inductors XFL5030 Halogen Exceptionally low DCR only 2.15 mOhms Free Excellent current handling up to 11.5 A AEC-Q200 Grade 1 (40C to +125C) 3.1 mm maximum height with a 5.48 mm 5.28 mm footprint AEC Core material Composite + Q200 125C Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 0.42 0.50 g Ambient temperature 40C to +125C with (40C rise) Irms current. Operating voltage 0 20 V Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 400/7 reel 1500/13 reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 5 6 2 4 DCR (mOhms) Isat (A) Irms (A) Inductance SRF typ 1 Part number 20% (H) typ max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise XFL5030-271ME 0.27 2.15 2.55 132 10.0 11.0 11.5 18.0 25.5 XFL5030-561ME 0.56 3.20 3.80 77.0 7.5 8.5 9.0 14.6 21.0 XFL5030-102ME 1.0 4.20 5.00 60.0 5.4 6.2 6.5 13.0 18.0 XFL5030-222ME 2.2 10.5 12.0 37.4 3.5 4.0 4.3 8.2 11.5 XFL5030-332ME 3.3 13.5 16.0 28.7 3.1 4.0 4.2 7.2 10.0 XFL5030-472ME 4.7 18.5 22.0 24.5 2.5 3.1 3.3 6.2 8.7 1. When ordering, please specify packaging code: Irms Testing XFL5030-472MEC Irms testing was performed on Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). Quantities 0.75 inch wide 0.25 inch thick less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). copper traces in still air. B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of Temperature rise is highly your part number from B to C. dependent on many factors D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked including pcb land pattern, (1500 parts per full reel). trace size, and proximity to 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. other components. Therefore 3. DCR measured on a micro-ohmmeter. temperature rise should be 4. SRF measured using Agilent/HP 4395A or equivalent. verified in application conditions. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 791-1 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.XXX Document 791-2 Shielded Power Inductors XFL5030 L vs Current L vs Frequency 100 0.4 0.3 Halogen Free 0.27 H 0.2 10 0.1 4.7 H 0 AEC 01 23 495 67 8101112 + Q200 125C 3.3 H Current (A) 2.2 H 1.0 H 0.8 1 0.56 H 0.6 0.56 H 0.27 H 0.4 0.2 0.1 0.1 1 10 100 0 Frequency (MHz) 01 23 495 67 810 Current (A) 0.208 0.008 1.4 5,28 0,2 1.2 1.0 0.8 1.0 H 0.6 0.216 0.008 0.4 5,48 0,2 0.2 0 0213 465 78 Current (A) Dash Indicates direction of terminals and number 3.0 start (short) lead. Connect high dv/dt here forlowest EMI. 2.5 2.0 2.2 H 1.5 0.122 max * 3,1 1.0 0.5 0.039 0.002 0.165 0 typ 1,0 0,05 4,2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.091 0.010 Current (A) 2,31 0.25 Terminal * For optional tin-lead and tin-silver- 5 Dash thickness (typ) copper terminations, dimensions 0.130 number (in / mm) 4 are for the mounted part. 3,31 Dimensions before mounting can be -271 0.0079 / 0.20 an additional 0.005 inch / 0.13 mm. 3 -561 0.0079 / 0.20 3.3 H -102 0.0079 / 0.20 2 -222 0.0047 / 0.12 0.185 -332 0.0047 / 0.12 4,70 1 -472 0.0039 / 0.10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Current (A) 0.046 1,18 6.0 Recommended inches 5.0 Dimensions are in mm Land Pattern 4.0 4.7 H 3.0 2.0 1.0 0 0 1.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Current (A) Document 791-2 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)