Type 550 105 C High Ripple, Long-life, Inverter Grade, Aluminum High Ripple, Long Life, Computer Grade High Value, High Ripple Current Type 550 is the original Inverter Grade capacitor for continuous operation at up to 105 C and it now is available in low voltages too. For best value its load life test is 2000 hours instead of the 5000 hours of the Type 550C. While less than half the life capability of the Type 550C, it is lower cost and easily lasts more than 10 years in typical industrial applications. Highlights 2,000 hour load life Ripple current to >50 amps ESRs to 2.5 m Specifications Operating Temperature: 40 C to +105 C Rated Voltage: 6.3 to 450 Vdc Capacitance: 90 F to 1.5 F Capacitance Tolerance: Vdc 150 V: 10 +75%, Vdc > 150 V: 10 +50% DCLeakage Current: 3CV A (4 mA max.) Ripple Current Multipliers: Ambient Temperature 45 C 55 C 65 C 75 C 85 C 95 C 105 C 1.73 1.58 1.41 1.22 1.00 0.71 0.57 Frequency 10 kHz 50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz up 1 and 2 inch diameter 50 V 0.77 0.85 1.00 1.05 1.08 1.08 1.08 51299 V 0.75 0.83 1.00 1.15 1.20 1.20 1.20 300 V 0.72 0.80 1.00 1.30 1.40 1.40 1.40 2 and 3 inch diameter 50 V 0.81 0.90 1.00 1.02 1.02 1.02 1.02 51299 V 0.81 0.90 1.00 1.07 1.07 1.07 1.07 300 V 0.72 0.80 1.00 1.25 1.35 1.35 1.35 Load Life: 2,000 h at full load 105 C Shelf Life: 500 h 105 C, Capacitance, ESR and DCL, initial requirements. Vibration: 0 to 55 Hz, 0.06 and 10 g max, 1.5 h each of 2 axis Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864)843-2277 Fax: (864)843-3800 www.cde.comType 550 105 C High Ripple, Long-life, Inverter Grade, Aluminum Outline Drawing Insulated Case Dimensions For bare can subtract 0.024 (0.61 mm) from D and 0.03 (0.76 mm) from L Typical Diameter (D) Length (L) Terminals (S) Weight Case 0.031 0.78 0.062 1.57 0.015 0.38 Code (in) (mm) (in) (mm) (in) (mm) (oz) (g) AK 1.399 35.53 1.655 42.04 0.500 12.70 1.90 54 AA 1.399 35.53 2.155 54.74 0.500 12.70 2.00 57 AH 1.399 35.53 2.655 67.44 0.500 12.70 2.70 77 AB 1.399 35.53 3.155 80.14 0.500 12.70 3.30 94 AJ 1.399 35.53 3.655 92.84 0.500 12.70 3.80 108 AC 1.399 35.53 4.155 105.54 0.500 12.70 4.40 125 AD 1.399 35.53 4.655 118.24 0.500 12.70 5.10 145 AE 1.399 35.53 5.155 130.94 0.500 12.70 6.80 193 AF 1.399 35.53 5.655 143.64 0.500 12.70 8.10 230 BA 2.024 51.41 2.155 54.74 0.875 22.23 5.40 153 BH 2.024 51.41 2.655 67.44 0.875 22.23 6.10 173 BB 2.024 51.41 3.155 80.14 0.875 22.23 6.80 193 BJ 2.024 51.41 3.655 92.84 0.875 22.23 8.20 232 BC 2.024 51.41 1.155 29.34 0.875 22.23 9.50 269 BD 2.024 51.41 4.655 118.24 0.875 22.23 10.30 292 NOTE:With the stud-mount fea- BE 2.024 51.41 5.155 130.94 0.875 22.23 10.70 303 ture, a thermally-conductive disk BF 2.024 51.41 5.655 143.64 0.875 22.23 13.00 369 can be inserted in the bottom CB 2.524 64.11 3.155 80.14 1.125 28.58 10.40 295 flush with the outer insulating CJ 2.524 64.11 3.655 92.84 1.125 28.58 12.73 361 sleeve.This reduces the thermal CC 2.524 64.11 4.155 105.54 1.125 28.58 15.00 425 resistance through the can bottom CD 2.524 64.11 4.655 118.24 1.125 28.58 17.20 488 by 0.3 C/W. Can Style P. CE 2.524 64.11 5.155 130.94 1.125 28.58 19.30 547 Stud Dimensions CF 2.524 64.11 5.655 143.64 1.125 28.58 21.40 607 Case Stud P 0.039 DJ 3.024 76.81 3.655 92.84 1.250 31.75 20.00 567 Diam. Thread (1.0 mm) DC 3.024 76.81 4.155 105.54 1.250 31.75 22.20 629 1.38 M8 0.470 (12.0) DD 3.024 76.81 4.655 118.24 1.250 31.75 25.50 723 1.75 M8 0.470 (12.0) DE 3.024 76.81 5.155 130.94 1.250 31.75 30.00 850 2.00 M12 0.630 (16.0) DF 3.024 76.81 5.655 143.64 1.250 31.75 31.90 904 DP 3.024 76.81 5.905 149.99 1.250 31.75 32.85 931 2.50 M12 0.630 (16.0) DG 3.024 76.81 8.655 219.84 1.250 31.75 43.30 1227 3.00 M12 0.630 (16.0) Post Diameter H Maximum min Full Thread For Case Terminal Style Code (in) (mm) (in) (mm) Thread (in) (mm) Diameters Low Post A 0.314 8.0 0.094 2.4 10-32 0.218 5.5 1 to 3 High Post B 0.314 8.0 0.281 7.1 10-32 0.375 9.5 1 to 3 High Current, Low D 0.684 17.4 0.125 3.2 -28 0.344 8.7 2 & 3 Click here High Current, High E 0.684 17.4 0.281 7.1 -28 0.469 11.9 2 & 3 to see Small M5 Post M 0.314 8.0 0.281 7.1 M5 0.375 9.5 1 & 2 Hardware & M5 Post F 0.512 13.0 0.23 5.8 M5 0.344 8.7 2 & 3 Mounting M6 Low Post G 0.684 17.4 0.125 3.2 M6 0.344 8.7 2 & 3 Options M6 High Post H 0.684 17.4 0.281 7.1 M6 0.469 11.9 2 & 3 CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864)843-2277 Fax: (864)843-3800 www.cde.com