Type CD16 & CDV16 Snubber and RF Application, Mica Capacitors Higher dV/dt Capability and Flatter Insertion Loss Ideal for snubber and RF applications, CDV16 mica capacitors now handle dV/dts up to 275,000 V/s and they assure controlled, resonance-free performance through 1 GHz. CDV16/CD16 mica capacitors excel in both snubber applications and high-frequency applications like RF and CATV. Type CDV16s high pulse current capability make them ideal for pulse and snubber applications. CDV16 capacitors withstand an unlimited number of pulses with a dV/dt of 275,000 V/s. This is a 20% increase in dV/dt capability when compared to our CDV19 mica capacitors and CDV16s are smaller too. CDV16 capacitors handle higher peak currents up to 825 amps. They also handle high continuous RMS current at 5 MHz and up to 30 MHz. For example, a 3000 pF CDV16 capacitor handles 6.2 A rms continuously at 13.56 MHz and it is 1/4 the cost of a comparable porcelain ceramic capacitor. In addition to being great for snubbers, CDV16 is a fit for your RF applications. Their compact size and closer lead spacing improves insertion loss performance insertion loss data is flat within 0.2 dB, typically to beyond a gigahertz. Highlights Handles up to 9.0 amps rms continuous current Very low ESR from 10 to 100 MHz Specifications Low, notch-free impedance to 1GHz Stable: no capacitance change with (V), (t), and (f) Capacitance Range: 100 pF to 7,500 pF Very high Q at UHF/VHF frequencies Capacitance Tolerance: 5% (J) standard Tape and reeling available 1% (F) and 2% dV/dt capability up to 275,000 V/s (G) available 1,500 amps peak current capability Voltage: 500 Vdc & 1,000 Vdc Temperature Range: 55 C to +150 C Part Numbering System CD16 / CDV16 F D / F 101 J O 3 F Series Characteristic Voltage Capacitance Capacitance Temperature Vibration Blank = Code (Vdc) (pF) Tolerance Range Grade Not Specified F= RoHS Compliant D = 500 Vdc 101 = 100 pF O = 55 C to +125 C F = 1000 Vdc 102 = 1000 pF P = 55 C to +150 C Vibration Grade Vibration Characteristics No. MIL-STD-202 Condition (Hz) Temp. Coeff. Capacitance Standard Cap. Code 3 Method 204 10 to 2,000 ppm/ C Drift Range Condition D F 0 to +70 (0.05% +0.1 pF) 91 pF and up Standard vibration grade is 3 Capacitance Tolerance Tol. Code Tolerance F 1 % G 2 % J 5 % Standard tolerance is 5% For RoHS compliant add the letter F at the end of the part number. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Ph: (508)996-8561 Fax: (508)996-3830 www.cde.comType CD16 & CDV16 Snubber and RF Application, Mica Capacitors Typical Performance Curves CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Ph: (508)996-8561 Fax: (508)996-3830 www.cde.com