Type SPSX Solid Polymer Aluminum SMT Capacitors
The solid polymer SPSX aluminum capacitor is an
ideal choice for audio/visual equipment, home
appliances, computers, measuring equipment and
industrial robots. Like the SPCX, the SPSX is a compact
component. But SPSX oeff rs a much lower ESR and a
higher ripple current rating than the SPCX. The SPSX
is a green product and RoHS compliant.
Highlights
Complies with the EU Directive 2002/95/EC
A low-profile height of 1.9 mm
requirement restricting the use of Lead (Pb),
Oerff ed on tape and reel
Mercury (Hg), Cadmium (Cd), Hexavalent chro-
Can withstand 260 C reflow for 10 s
mium (Cr(VI)), PolyBrominated Biphenyls (PBB)
andPolyBrominated Diphenyl Ethers (PBDE).
4.5 - 9 m ESR @ 100 kHz
A great value in a small package
Specifications
Operating Temperature Range:
40 C to +105 C
Capacitance Range:
82 F to 560 F
Operating Working Range:
2.0, 2.5, 4.0, 6.3 Vdc
Capacitance Tolerance:
20 % (120 Hz @ 20 C)
Surge Voltage:
Vdc 2.0 2.5 4.0 6.3
Surge 2.5 3.1 5.0 8.0
Rated Ripple Current:
See ratings table
Life Test: Surge Test:
Test temperature is +15 C to +35 C in series with
Apply rated voltage at +105 C 2 C for 1000 h
a 1000 resistor with the surge voltage applied for
* Leakage current: ratings table values
1000 cycles of 305 s (ON) and 5 min 30 s (OFF)
* Capacitance: 10% of initial measured value
Leakage current: I0.1CV
* DF: ratings table values
Capacitance: 10% of initial measured value
* Appearance: No abnormal change to occur
DF: the values in the ratings table
Moisture Resistance:
Appearance: No abnormal change to occur
+60 C 2 C @ 90% RH; rated voltage for 500 h
Vibration:
* Leakage current: rating table values
10 Hz to 2000 Hz to 10 Hz frequency applied one
* Capacitance: +70%, 20% (2V, 2.5V)
cycle per 20 min at a total amplitude of 1.5 mm.
+60%, 20% (4V)
Direction and duration of vibration will be 2 h each in
+50%, 20% (6.3V)
the X,Y and Z planes for total of 6 h with the capacitor
of initial measured value
soldered in place.
* DF: 200% of initial specified value
Appearance; No abnormal change to occur.
* Appearance: No abnormal change to occur
Capacitance: Measured value to be stabilized
Shelf Life Test:
during test, when measured several times
within 30 min before completion of test.
+105 C 2 C for 500 h
Leakage current: rating table values
Capacitance: 10% of initial measured value
DF: ratings table values
Appearance: No abnormal change to occur
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com
OBSOLETEType SPSX Solid Polymer Aluminum SMT Capacitors
Outline Drawings
+ -
H
S
S
L
W1
W2
W2
L (0.2) W1 (0.2) W2 (0.1) H (0.2) S (0.3)
Surface finish of terminal; Tin (Sn) 7.3 mm 4.3 mm 2.4 mm 1.9 mm 1.3 mm
Marking
W1
Polarity Stripe (Anode)
Capacitance
+
W.V. Code
d = 2.0 V
Lot Code
e = 2.5 V
g = 4.0 V
j = 6.3 V
Part Numbering System
SPSX 221 M 0E R -7
Type Capacitance Capacitance Voltage Code Packaging Optional Lower
ESR Value at 100
Code Tolerance 02 = 2.0 Vdc Code
kHz (see tables
820 = 82 M = 20% 0E = 2.5 VDC R = Tape & Reel:
for available op-
3500 pcs/reel
101 = 100 04 = 4.0 Vdc
tions)
221 = 220 06 = 6.3 Vdc B = Bulk
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com
OBSOLETE