Ordering information DC-DC Converters PCB Mount Type MGF S 1R5 24 05 -O MGFS1R5 1 2 3 4 5 6 1 Series name R 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) MODEL MGFS1R5243R3 MGFS1R52405 MGFS1R52412 MGFS1R52415 MAX OUTPUT WATTAGE W 1.32 1.50 1.56 1.50 VOLTAGE V 3.3 5 12 15 DC OUTPUT CURRENT A 0.4 0.3 0.13 0.1 SPECIFICATIONS MODEL MGFS1R5243R3 MGFS1R52405 MGFS1R52412 MGFS1R52415 VOLTAGE V DC9 - 36(Surge voltage 50V,100ms max) *1 INPUT CURRENT A 0.072typ 0.079typ 0.079typ 0.077typ *1 EFFICIENCY % 77typ 80typ 83typ 82typ VOLTAGE V 3.3 5 12 15 CURRENT A 0.4 0.3 0.13 0.1 LINE REGULATION mV 20max 20max 48max 60max LOAD REGULATION mV 20max 20max 48max 60max RIPPLE mVp-p *2 120max 120max 150max 150max OUTPUT RIPPLE NOISE mVp-p *2 200max 200max 200max 200max -20 to +85C 50max 50max 150max 180max TEMPERATURE REGULATION mV -40 to +85C 80max 80max 240max 290max *3 DRIFT mV 20max 20max 48max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT MODEL MGFS1R5483R3 MGFS1R54805 MGFS1R54812 MGFS1R54815 MAX OUTPUT WATTAGE W 1.32 1.50 1.56 1.50 VOLTAGE V 3.3 5 12 15 DC OUTPUT CURRENT A 0.4 0.3 0.13 0.1 SPECIFICATIONS MODEL MGFS1R5483R3 MGFS1R54805 MGFS1R54812 MGFS1R54815 VOLTAGE V DC18 - 76(Surge voltage 100V,100ms max) *1 INPUT CURRENT A 0.037typ 0.040typ 0.040typ 0.039typ *1 EFFICIENCY % 76typ 79typ 82typ 81typ VOLTAGE V 3.3 5 12 15 CURRENT A 0.4 0.3 0.13 0.1 LINE REGULATION mV 20max 20max 48max 60max LOAD REGULATION mV 20max 20max 48max 60max RIPPLE mVp-p *2 120max 120max 150max 150max RIPPLE NOISE mVp-p *2 OUTPUT 200max 200max 200max 200max -20 to +85C 50max 50max 150max 180max TEMPERATURE REGULATION mV -40 to +85C 80max 80max 240max 290max *3 DRIFT mV 20max 20max 48max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT MG-26MGFS1R5 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz 98.0m/s (10G), 3minute period, 60minutes each along X, Y and Z axis 2 IMPACT 490.3m/s (50G) 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm 0.67X0.48X0.34 inches (WXHXD) / 4g max OTHERS COOLING METHOD Convection/Forced air *1 Rated input 24V or 48V DC Io=100% *2 Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *3 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible. * MGFW1R5xx12/MGFW1R5xx15 is available as single output, +24V/+30V External view Recommended Pad and Hole dia. Model TOP VIEW 4-f0.9 <Standard> Model 5.08 2.2 2.54 0.2 0.09 2.8 0.1 12.7 5-f0.9 <Option : Y2> 0.11 0.5 Vin Vin Vout Vout 0.5 0.02 17 0.67 <Pin Configuration (Option : Y2)> Unit : 0.1inch Dimension : mm Tolerance 0.5 0.02 Dimensions in mm, = inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 2.2 2.54 0.09 0.1 12.7 0.5 Vin Vin Vout TRM Vout 0.5 0.02 17 0.67 MG-27 0.5 0.5 0.25 0.25 0.02 0.02 0.01 0.01 3.5 12 3.5 12 8.5 8.5 0.14 0.48 0.14 0.48 0.34 0.34