9401-05-00 Coto

9300-9400 SERIES/SURFACE MOUNT REED RELAYS 9300-9400 Series Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumen-tation and Telecommunications requirements, Cotos 9300 and 9400 Series specicfi ation tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Cotos Factory to discuss a custom design. 9300-9400 Series Features 12 13 u High Insulation Resistance - 10 minimum (10 Typical) u High reliability, hermetically sealed contacts for long life u Molded thermoset body on integral lead frame design u High speed switching compared to electromechanical relays u Tape & Reel available u UL File E67117 - Contact factory for details u RoHS compliant 9300 Series 9400 Series u u Load switching (15 Watts) and Small surface mount package (0.225 x 0.550) u high dielectric strength Low capacitance (500 VDC) between contacts (Contact to Shield - 1.1 pF typical) u u Proven Reliable to switch Coaxial shield for 50 impedance. Excellent telephone loads (48V, 100mA) for RF and Fast Rise Time Pulse switching (up to 2.0 GHz) DIMENSIONS in Inches (Millimeters) Model 9300 Model 9400 .100 TYP .100 TYP .100 TYP .100 TYP 2 (2.54) (2.54) (2.54) (2.54) Gull Wing .225 .225 2 Gull Wing (5.72) (5.72) .700 .700 .900 .900 (17.78) (17.78) .025 .025 (22.86) (22.86) (0.64) (0.64) .020 .020 .025 .025 .020 .020 (0.64) (0.64) (0.51) (0.51) .225 2 .225 J-Lead 2 .270 .270 (5.72) (5.72) J-Lead (6.86) (6.86) .500 .500 (12.70) (12.70) .700 .700 (17.78) (17.78) .020 .020 Indicates Indicates Pin 1 side (0.51) Pin 1 side (0.51) .018 .018 Indicates Pin 1 side Indicates Pin 1 side (0.45) (0.45) .225 .225 Top View Top View (5.71) (5.71) .240 .240 9402 9401 .150 .150 .125 .125 (6.09) (6.09) .550 (3.81) .550 (J lead shown) (3.81) (3.18) 9401 (J lead shown) (3.18) .100 .100 (14.0) (14.0) .750 (J.750 lead shown) (2.54) (2.54) 9300(19.0) MAX. (19.0) MAX225 .225 .600 .600 .225 (5.71) (5.71) .240 (15.24) (15.24) (5.71) (6.09) 9301 End View .150 (3.81) .075 (1.90) .100 (2.54) .150 (3.81) .020 (0.51) .020 (0.51) .018 (0.45) .020 (0.51) 9402 End View 9401 End View Ordering Information (J Lead Shown) (J Lead Shown) 9XXX-XX-XX Part Number Model Number Lead Style NOTE 9301 9401 9402 00=Gull Wing 20=J-Lead u For RF Graph Performance, see RF Graphs section Coil Voltage of the Reed Relay Technical & Application Information 05=5 volts 12=12 volts 07082013 tel: (401) 943.2686 fax: (401) 942.09209301 9401 9402 MODEL NUMBER Parameters Test Conditions Units 1 Form A 1 Form A 1 Form A 50 Coaxial COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.2 15.0 6.2 15.0 Coil Resistance +/- 10%, 25 C 350 1000 200 825 200 825 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 0.4 1.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1 1 Contact Rating Max DC/Peak AC Resist. Watts 15 10 10 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 250 250 250 Static Contact 50mV, 10mA 0.150 0.125 0.125 Resistance (max. init.) Dynamic Contact 0.5V, 50mA 0.200 0.150 0.150 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 12 12 12 10 10 10 (minimum) at 100V, 25C, 40% RH No Shield pF 0.7 0.2 - Capacitance - Typical Shield Floating pF - - 0.4 Across Open Contacts Shield Guarding pF - - 0.1 No Shield pF 1.4 1.1 - Open Contact to Coil Shield Floating pF - - 1.1 Shield Guarding pF - - 0.1 Contact to Shield Contacts Open, Shield Floating pF - - 1.1 3 Between Contacts VDC/peak AC 500 300 300 Dielectric Strength Contacts to Shield VDC/peak AC - - 1500 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.40 0.40 0.40 bounce - Typical 30 Hz Square Wave Release Time - Typical msec. 0.10 0.20 0.20 2 4 2 2 6 4 4 To p V i e w : Dot stamped on top of relay refers to pin 1 location Notes: 1 Consult factory for life expectancy at other switching loads. 1 3 1 5 3 1 3 2 Surface mount component processing temperature: 500F / 260C max for 1 min- ute dwell time. Temperature measured on leads where lead exits molded package. 3 Higher dielectric strength available, consult factory. Environmental Ratings: + + Storage Temp: -35C to 100C Operating Temp: -20C to 85C All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 Gs to 2000 Hz Shock: 50 Gs 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.