PRODUCT FAMILY DATA SHEET CLX6F-GKB: PLCC6 3 IN 1 SMD LED PRODUCT DESCRIPTION FEATURES APPLICATIONS These SMD LEDs are packaged in an Size (mm): 3.5 x 3.4 x 2.8 Architecture Lighting industry standard PLCC6 package. These Channel Letter high reliability and high brightness LEDs Dominant Wavelength: Backlight Green (520 - 540nm) are designed to work in a wide range of environmental condition and are ideally Luminous Intensity (mcd) suited for use in illumination applications. CLX6F-GKB:(5020 - 9000) Its wide viewing angle makes these LEDs Water-Resistant (IPX8)* ideally suited for channel letter, or general Moisture Sensitivity Level: 5a backlighting and illumination applications. Lead-Free The flat top emitting surface makes it easy RoHS Compliant for these LEDs to mate with light pipes. Matte Surface *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. The leads area of the LED is not IPx8 rated and its required to insulate for moisture by customer in outdoor application. Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and the CLD-CT1380 Cree LED logo is a trademark, of Cree, Inc. 1 REV 4CLX6F-GKB: PLCC6 3 IN 1 SMD LED ABSOLUTE MAXIMUM RATINGS (T = 25C) A Items Symbol Absolute Maximum Rating Unit Note 1 Forward Current I 3 x 35 mA F Note 2 Peak Forward Current I 3 x 100 mA FP Reverse Voltage V 5 V R Power Dissipation P 3 x 126 mW D Operation Temperature T -40 ~ +85 C opr Storage Temperature T -40 ~ +100 C stg Junction Temperature T 110 C J Junction/Ambient 1 chip on R 400 C/W THJA Junction/Solder Point 1 chip on R 230 C/W THJS Electrostatic Discharge ESD 1000V Classification (MIL-STD-883E) Note: 1. Single-color light 2. Pulse width 0.1 msec, duty 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T = 25C) A Characteristics Condition Symbol Values Unit Dominant Wavelength I = 3 x 20mA 520~540 nm F DOM Spectral bandwidth at 50% I max I = 3 x 20mA 28 nm REL F V 2.9 V F(avg) Forward Voltage I = 3 x 20mA F V 3.6 V F(max) I 5020 mcd V(min) Luminous Intensity I = 3 x 20mA F I 7100 mcd V(avg) Luminous Flux(Reference) I = 3 x 20mA 19.6 lm F V(avg) Reverse Current (max) V = 5 V I 10 A R R * Continuous reverse voltage can cause LED damage. 2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and the CLD-CT1380 Cree LED logo is a trademark, of Cree, Inc. 2 REV 4