PRODUCT FAMILY DATA SHEET XLamp CMU1519 LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp CMU LED family delivers 14.5-mm optical source Characteristics ............................................... 2 industry-leading performance in commonly- Available in 70-, 80-, 90-, and Operating Limits ............................................. 2 available package and LES sizes. The CMU 95-minimum CRI options Flux Characteristics, EasyWhite Order family delivers up to 10% higher LPW EasyWhite 2-, 3- and 5-step binning Codes and Bins .............................................. 3 than the previous generation CMT family Premium Color 2- and 3-step binning Flux Characteristics, Premium Color Order while retaining mechanical and optical Forward voltage option: 36-V class Codes and Bins .............................................. 4 compatibility with CMT. XLamp CMU LEDs 85C binning and characterization Relative Spectral Power Distribution, are optimized for premium indoor lighting Maximum drive current: 1440mA EasyWhite LEDs ............................................ 5 applications, including track, spot and 115 viewing angle, uniform Relative Spectral Power Distribution, downlight, as well as outdoor lighting. chromaticity profile Premium Color LEDs ...................................... 6 Top-side solder connections Electrical Characteristics ............................... 8 RoHS and REACh compliant Relative Luminous Flux .................................. 9 UL recognized component (E349212) Typical Spatial Distribution ............................ 9 Performance Groups - Chromaticity ........... 10 Premium Color Performance Groups - Chromaticity ................................................. 11 EasyWhite Bins Plotted on the 1931 CIE Color Space .................................................. 12 Premium Color Bins Plotted on the 1931 CIE Color Space............................................ 13 Bin and Order Code Formats ....................... 14 Mechanical Dimensions .............................. 15 Thermal Design ............................................ 16 Notes ............................................................ 17 Packaging ..................................................... 18 Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2020-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS254 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and EasyWhite are registered trademarks of Cree LED. UL and the UL logo are registered 1 REV 1B trademarks of UL LLC. XLAMP CMU1519 LED CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Viewing angle (FWHM) degrees 115 ESD withstand voltage (JEDEC JS-001-2012) V Class 3A DC forward current mA 1440* Reverse current mA 0.1 Forward voltage ( 540mA, 85C) V 33.7 37.5 Forward voltage ( 540mA, 85C) V 34.4 38.2 * Refer to the Operating Limits section. OPERATING LIMITS The maximum current rating of the CMU1519 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Either solder pad shown in the Mechanical Dimensions section on page 15 can be used as the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree LED recommends a maximum LES temperature of 140C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 16 for more information on LES temperature measurement. CMU1519 1500 85 C, 1440 mA 1400 1300 1200 1100 1000 900 800 700 125 C, 600 554 mA 500 400 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (C) 2020-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS254 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and EasyWhite are registered trademarks of Cree LED. UL and the UL logo are registered 2 REV 1B trademarks of UL LLC. If (mA)