CLD-DS54 Rev 9A Product family data sheet Cree XLamp CXA2530 LED Pro DuCt DEsCriPtion fEA turEs tAbLE of ContEnts The XLamp CXA2530 LeD array expands Available in 4step, 3step and 2step Characteristics ............................................2 Crees family of highflux, multidie EasyWhite bins at 2700K, 3000K, Operating Limits ..........................................2 arrays, offering high performance in an 3500K, 4000K & 5000K CCT and Flux Characteristics, EasyWhite Order easytouse platform. With XLamp LED 4step EasyWhite bins at 5700K & Codes and Bins ...........................................3 lightingclass reliability, the CXA2530s 6500K CCT Flux Characteristics, ANSI White Order uniform emitting surface enables both Available in ANSI white bins at Codes and Bins ...........................................6 directional and nondirectional lighting 4000K, 5000K, 5700K & 6500K Relative Spectral Power Distribution .........7 applications and luminaire designs. CCT Electrical Characteristics ............................7 Available in 2step and 4step color Available in 70, 80, 90 and Relative Luminous Flux vs. Current ............8 consistency, and featuring a 19mm 93minimum CRI options Typical Spatial Distribution .........................9 optical source, the CXA2530 brings new Forward voltage option: 36V class Performance Groups Brightness .............9 levels of flux and efficacy to this form 85C binning and characterization Performance Groups Chromaticity ....... 10 factor. Maximum drive current: 1600mA Cree EasyWhite Bins Plotted on the 115 viewing angle, uniform 1931 CIE Color Space .............................. 13 The CX Family LED Design Guide chromaticity profile Cree ANSI White Bins Plotted on the provides basic information on the Topside solder connections 1931 CIE Color Space .............................. 13 requirements to use the CXA2530 LED Thermocouple attach point Bin and Order Code Formats ................... 14 successfully in luminaire designs. NEMA SSL3 2011 standard flux bins Mechanical Dimensions .......................... 14 RoHS and REACh compliant Thermal Design ........................................ 15 UL recognized component Notes ........................................................ 16 (E349212) Packaging ................................................. 17 Copyright 2012-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and Cree, Inc. EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE.Com/XLAmp XLamp CXa 2530 LED Ch ArAC tEristiCs Characteristics unit Minimum t ypical Maximum Viewing angle (FWHM) degrees 115 ESD classification (HBM per MilStd883D) v 8000 DC forward current mA 1600* Reverse current mA 0.1 Forward voltage ( 800mA, 85C) v 36.4 Forward voltage ( 800mA, 25C) v 42 * Refer to the Operating Limits section. oPErA ting LiMits The maximum current rating of the CXA2530 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steadystate operation. The graph shown below assumes that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 14 for the location of the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a maximum LES temperature of 135C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 15 for more information on LES temperature measurement. CXA2530 1800 1600 1400 1200 1000 800 600 400 200 0 0 25 50 75 100 125 150 Case Temperature (C) Copyright 2012-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 2 If (mA)