CLD-DS130 Rev 2A
Product family data sheet
Cree XLamp XHP35 LEDs
XHP35 High Density LED XHP35 High intensity LED
Pro DuCt DEsCriPtion FEAturEs tAbLE o F ContEnts
The XLamp XHP35 LeD brings the Available in white in high-density and Characteristics ..............................................2
performance of Crees extreme High high-intensity versions for design Flux Characteristics, High Density
Power LeDs to the XP footprint, setting a flexibility easyWhite Order Codes and Bins ...............3
new standard for performance delivered XHP35 High Intensity LeD is Flux Characteristics, High Density ANSI
by a 3.45 x 3.45 mm LED. Leveraging the optimized to deliver maximum White Order Codes and Bins ........................5
breakthrough 12-v monolithic power die candela through secondary optics Flux Characteristics, High Intensity
built on Crees innovative architecture and Available in 5-step easyWhite bins easyWhite Order Codes and Bins ...............8
uniquely enabled by the SC5 Technology at 2700K to 5700K CCT and 3-step Flux Characteristics, High Intensity ANSI
Platform, the XHP35 LeD allows the EasyWhite bins at 2700K to 3500K White Order Codes and Bins ..................... 11
use of readily available cost--optimized CCT Relative Spectral Power Distribution ........ 15
drivers to unleash the capabilities of Available in ANSI white bins at Relative Flux vs. Junction Temperature .... 15
Crees high-power LeDs. Available in both 2700K to 7000K CCT electrical Characteristics ........................... 16
high-density and high-intensity versions, Available in standard, 70-, 80-, 85- Relative Flux vs. Current ............................ 16
the XHP35 LeD is application optimized and 90-minimum CRI options Relative Chromaticity vs. Current .............. 17
to enable new designs and radically lower Binned at 85C Relative Chromaticity vs. Temperature ..... 18
system costs. Maximum drive current: 1050mA Typical Spatial Distribution ........................ 19
Low thermal resistance: 1.8C/W Thermal Design .......................................... 20
Wide viewing angle: 115 for high Performance Groups Luminous Flux..... 20
intensity, 125 for high density Performance Groups Chromaticity ........ 21
Unlimited floor life at Crees easyWhite Chromaticity Regions
30C/85% RH Plotted on the 1931 CIe Curve .................. 24
Reflow solderable - JEDEC Crees Standard Cool White Kits Plotted
J-STD-020C on ANSI Standard Chromaticity Regions .. 27
RoHS and ReACh compliant Crees Standard Warm and Neutral White
UL recognized component Kits Plotted on ANSI Standard
(e349212) Chromaticity Regions ................................ 28
Bin and Order Code Formats ..................... 29
Reflow Soldering Characteristics .............. 30
Notes .......................................................... 31
Mechanical Dimensions ............................ 33
Tape and Reel ............................................. 35
Packaging ................................................... 37
Copyright 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, Cree, Inc.
XLamp , EasyWhite and SC5 Technology are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.Com/XLAmp
XLamp XHp 35 LED
CHArAC tEristiCs
Characteristics unit Minimum t ypical Maximum
Thermal resistance, junction to solder point C/W 1.8
viewing angle (FWHM) - High Density degrees 125
viewing angle (FWHM) - High Intensity degrees 115
Temperature coefficient of voltage mV/C -8
eSD withstand voltage (HBM per Mil-Std-883D) v 8000
DC forward current mA 1050
Reverse voltage v -5
Forward voltage (@ 350mA, 85C) v 11.3 11.9
LeD junction temperature C 150
Copyright 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, XLamp , EasyWhite and SC5 Technology are registered
trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
2