clD- ap86 rev 8B binning & LabeLing Cree XLamp XT Family LeDs TabLe oF ConTenTs inTroDuCTion Introduction ......................................................... 1 This document describes the product nomenclature Bin and Order-Code Format ................................... 2 required to select and order crees Xlamp XT Family performance Groups Brightness ........................... 3 LEDs. XLamp XT Family LEDs are tested and sorted Performance Groups Radiant Flux ......................... 3 into bins which are then combined into orderable kits performance Groups Dominant wavelength ........... 4 identified by an order code. Performance Groups Forward Voltage ................... 4 performance Groups chromaticity ........................ 5 all Xlamp leDs are tested and sorted by color and crees Standard white chromaticity r egions plotted brightness into a unique bin. each bin contains leDs on the cIe 1931 curve .......................................... 9 from only one color and brightness group and is uniquely crees Standard cool white Kits plotted on aNSI identified by a bin code. White XLamp LEDs are sorted Standard chromaticity r egions ..............................11 by chromaticity (color) and luminous flux (brightness). crees outdoor white Kits plotted on aNSI Standard color Xlamp leDs are sorted by dominant wavelength chromaticity r egions ...........................................12 (color) and luminous or radiant flux (brightness). LEDs crees Standard w arm and Neutral white Kits plotted on aNSI Standard chromaticity r egions .......13 are shipped on reels containing leDs from one bin and crees 2450 K & 2200 K ccT white Kits plotted on are always labeled with the appropriate bin code. aNSI Standard chromaticity r egions ......................14 crees Standard chromaticity Kits ..........................15 Kits contain leDs from a number of similar bins and Standard order codes and Bins are fully defined by their order codes. A full explanation XT-e aNSI cool white ......................................17 of the order codes for XLamp XT Family LEDs, as well XT-e Neutral white ..........................................18 as a list of standard order codes, is provided in this XT-e warm white ............................................20 document. 12-volt XT-e Hvw w arm white ..........................21 24-volt XT-e Hvw Neutral white ........................22 24-volt XT-e Hvw w arm white ..........................22 48-volt XT-e Hvw aNSI cool white ....................23 48-volt XT-e Hvw Neutral white ........................24 48-volt XT-e Hvw w arm white ..........................25 XT-e r oyal Blue ...............................................27 copyright 2011-2015 cree, Inc. all rights reserved. The information in this document is subject to change without notice. cree , cCree, Inc.ree, Inc. the cree logo and Xlamp are registered trademarks of cree, Inc. This document is provided for informational purposes only and is 4600 Silicon Driv4600 Silicon Drivee Durham, NC 27703Durham, Nc 27703 not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. USUSaA T Tel: +1.919.313.5300el: +1.919.313.5300 www.cree.com/xlamp www.cree.com/Xlamp xlamp xT led binning & labeling bin anD orDer-CoDe FormaT Bin codes and order codes for XT-E White LEDs are configured in the following manner: order Code bin Code Series Series XTE = XT-E XTE = XT-E Internal code Configuration B: Internal code Luminous flux group D: Reel size Color specification Color specification 0: No Minimum CRI 0: No Minimum CRI B: 70 Minimum CRI B: 70 Minimum CRI L: Standard CRI L: Standard CRI H: 80 CRI Minimum H: 80 CRI Minimum P: 85 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum U: 90 CRI Minimum SSSCCC-B-WWW-FFF-VR-AAAA Internal code Chromaticity kit Vf bin SSSCCC-BD-HHHH-NNNNVRFGG 0: Default Flux Chromaticity bin Vf bin 0: Default Color Internal code AWT = White Color AWT = White Bin codes and order codes for XT-E High Voltage White LEDs are configured as follows: bin Code order Code Series Series XTE = XT-E XTE = XT-E Configuration Configuration B: Voltage class B: Voltage class D: Reel size Luminous flux group Color Specification L: Standard CRI Color specification H: 80 CRI Minimum L: Standard CRI H: 80 CRI Minimum Chromaticity SSSCCC-B-WWW-FFF-VR-AAAA SSSCCC-BD-HHHH-NNNNNVFGG Internal code Flux Vf bin Internal code 0: Default Color Chromaticity group HVW = High Voltage White Color HVW = High Voltage White Copyright 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 2