84137021

Panel Mount Datasheet GN Series AC Output SSRs Current rating 10 and 125 Amps Output voltage 24-280 VAC and 48-660 VAC Available with or without IP20 touch-safe cover LED Input Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers EMC Compliant to level 3 For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10 A 25 A 50 A 75 A 100 A 125 A 3-32 VDC 84134000 84134010 84134020 84134030 84134040 84134080 18-36 VAC 84134002 84134012 84134022 84134032 84134042 84134082 90-280 VAC 84134001 84134011 84134021 84134031 84134041 84134081 Operating Voltage AVAILABLE OPTIONS 0: 24-280 VAC/Zero Voltage Turn-On 1: 48-660 VAC/Zero Voltage Turn-On 2: 24-280 VAC/Instantaneous Turn-On 3: 48-660 VAC/Instantaneous Turn-On Thermal Pad Blank: Not included Series H: Included 8413 4 0 1 U0 H Control Voltage Rated Load Touch Safe Cover 0: 3-32 VDC Current 4: Not included (IP00) Required for valid part number 0: 10 Amps 1: 90-280 VAC 7: Included (IP20) For options only and not required for valid part number 2: 18-36 VAC 1: 25 Amps 2: 50 Amps Not all part number combinations are available. > 3: 75 Amps Contact Crydom Technical Support for information on 4: 100 Amps the availability of a specific part number. 8: 125 Amps (1) OUTPUT SPECIFICATIONS Description 280 VAC 660 VAC Operating Voltage (47-440Hz) Vrms 24-280 48-660 Transient Voltage Vpk (2) 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.25 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 (1) OUTPUT SPECIFICATIONS Description 10 A 25 A 50 A 75 A 100 A 125 A Maximum Load Current Arms (3) 10 25 50 75 100 125 Minimum Load Current mArms 500 50 100 100 100 100 Maximum 1 Cycle Surge Current (50/60Hz) Apk 150/175 275/300 710/750 1050/1100 1120/1200 1600/1700 1 Second surge current (Apk. Ta=25C) 50/60 Hz 50 85 150 225 300 375 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 1.35 1.3 1.3 1.25 Thermal Resistance Junction to Case (Rjc) C/W 0.4 0.4 0.25 0.16 0.16 0.11 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 110/120 380/370 2520/2320 5500/5000 6270/6000 12800/12050 Minimum Heat Sink for Rated Current 40C C/W 5 2 1 0.7 0.5 0.5 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (1) INPUT SPECIFICATIONS Description 8413xxx0 8413xxx2 8413xxx1 Control Voltage Range 3-32 VDC (4) 18-36 VAC 90-280 VAC (5) Maximum Reverse Voltage -32 VDC - - Minimum Turn-On Voltage 3 VDC (4) 18 VAC 90 VAC Must Turn-Off Voltage 1 VDC 4 VAC 10 VAC Minimum Input Current (for on-state) mA 10 13 6 Maximum Input Current mA 15 15 10 Nominal Input Impedance Ohms Current Regulated Maximum Turn-On Time msec 1/2 Cycle (6) 20 20 Maximum Turn-Off Time msec 1/2 Cycle 30 30 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.53 oz (72 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Output will self trigger between 450-600 Vpk / 900-1200 Vpk for 280 VAC/660 VAC models not suitable for capacitive loads. (3) Heat sinking required, see derating curves. (4) 4-32 VDC for 48-660 VAC models. (5) For ambient temperatures above 40C the maximum control voltage must not exceed 250 VAC. (6) Turn-on time for Instantaneous turn-on versions is 0.1 msec. (7) AC models operating range is -20 to 80C. (8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). (9) Load can be wired to either SSR output terminal 1 or 2. (10) For single surge pulse Tc=25C Tj=125C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by 2 (1.414). For additional information or specic questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.