88226032 Crouzet

23/06/2014 www.crouzet.com Top 2000 6 s 12 mm Part number 88226011 Relay output Mono-voltage 1 timed changeover and 1 instantaneous contact Elapsed time can be saved mechanically in the event of a break in supply Progress of cycle displayed Housing 48 x 48 mm Connection by screw-terminal base or 8-pin base Part numbers Type Functions Relay outputs Delay Voltages 6 s 12 mm - - - 2201 240 V AC 88 226 011 Specifications Precision limit error 2% ( 5%/6 s) Repetition accuracy 1.5% ( 4%/6 s) Selection precision Seetiming range table for scale graduation Reset time 0.20 s Timed two-pole 1 Instantaneous single pole 1 Thermal rating 6,3 A 4 5 A - 230 V Rating (cos = 0.41) 10 operations Absorbed power-motor 3 VA cos 0,8 o 24 V +10% - 42 V -15% Voltage variation at maximum temperature of 55 C 48 V +10% - 110 V -20% according to IEC 255100 127 V 0% - 220 V -20% 240 V 0% Operating factor 100% Temperature limits use (C) -10+55 Temperature limits stored (C) -2070 Environmental protection Tropicalised to IEC 68-2-10 Vibration withstand on 3 axes (Veritas standard) 4 G - 55Hz Dielectric test voltage according to IEC 2555 or VDE 0435 1000 V -Un60V 2000 V - Un > 60 V Insulation according to standard VDE 0110 group C 380 V AC - 440 V DC Protection Housing IP 40 Degree of terminal protection IP 10 Conformity to standards NFC 45250 - VDE 0110 - 0435 - 0660 or ICE 529 Connection: Screw/saddle 2 Terminal capacity Single-wire 1 or 2 leads Multi-wire 0,75 - 2,5 mm 2 Terminal capacity Multi-wire 1 or 2 leads 0,5 - 1 mm Mounting: Base mounting on 8-pin socket Weight (g) 185 Dimensions (mm) 882260 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected23/06/2014 www.crouzet.com o N Legend Panel depth 10 mm max. M3 screw Dimensions (mm) 882265 o N Legend Panel depth 10 mm max. Dimensions (mm) Panel cut-out Dimensions (mm) Solder tag connector 25622301 - 8-pin Dimensions (mm) Inverter for DC supply 84861501: 24 48 V DC 84861503: 110 127 V DC Weight 150 g Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected