CVCO55BH-5256-5356 Crystek

MICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS Lower Frequency: 5256 MHz Upper Frequency: 5356 MHz Tuning Voltage: 1.0 4.0 VDC Supply Voltage: 4.75 5.0 5.25 VDC Output Power: -2.0 0 +2.0 dBm Supply Current: 20 30 mA nd Harmonic Suppression (2 Harmonic): -10 dBc Pushing: 5.0 MHz/V Pulling, all Phases: 4.0 MHz pk-pk Tuning Sensitivity: 56 MHz/V Phase Noise 10kHz offset: -86 dBc/Hz Phase Noise 100kHz offset: -109 dBc/Hz Load Impedance: 50 Input Capacitance: 10 pF Operating Temperature Range: -40 +85 C Storage Temperature Range: -45 +90 C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.comMICROWAVE A Division of Crystek Corporation SIDE VIEW BOTTOM VIEW RF 0.465 SQ Gold Finish (11.81 SQ) 0.030 Vcc (0.76) 0.100 (2.54) 0.052 (1.32) 0.025 Vt (0.64) 0.040 (1.02) BOTTOM ORIENTATION MARK TOP VIEW Pad Connection 0.500 0.500 12 11 10 9 (12.70) 2 Vt 13 10 RF-OUTPUT 0.415 8 0.405 14 Vcc Others GROUND 0.315 14 7 0.305 CRYSTEK PAD LOCATION CVCO55BH 15 0.215 6 0.205 5256-5356 16 0.115 5 0.105 YYWW Unless otherwise specified, Dimensions are in: IN 0.000 12 34 (mm) Pad Location Dimensions are in: Inches TOP ORIENTATION MARK TAPE AND REEL 0.059 TYP 0.1570.004 (1.50 ) TYP (4.000.10) DIRECTION OF FEED 0.9450.012 (24.000.30) 0.6300.004 Drawing not to scale (16.000.10) Product Control: Crystek Part Number: CVCO55BH-5256-5356 Release Date: 21-Aug-2013 Specification is subject to change without notice Revision Level: D Responsible: C. Vales Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com 0.500 (12.70) 0.000 0.080 0.115 0.180 0.215 0.280 0.315 0.380 0.415 0.500 0.150 (3.81)