S41X043220JP

S4x Series Sulfur Resistant Chip Resistor Arrays Features Anti-Sulfur Design Structure Leadless Surface Mount Construction Concave or Convex Terminations Solder Coated Nickel Barrier Pads RoHS Compliant in Accordance with EU Directive 2011/65/EU Isolated Circuit Configurations - Lead-Free Termination Finish - Exemption 7(c)-I, Electrical and electronic components containing Improved TCR Tracking vs. Discrete Resistors lead Pb in glass Fewer Placements Than Discrete Components Tape and Reel Packaging Applications Harsh Environments Communications/Networking Image Processing Automotive Electronics Portable Test Equipment DDR SDRAM, MDDR, DRAM Medical Equipment Pull-Up/Pull-Down Logic Gates Low Profile High Density Designs Description S4x Series Chip Arrays are designed to resist sulfurization which occurs in high-sulfur environments. Arrays are typically used for convenience when several resistors occupy the same area in a layout. Multiple package sizes and circuit configurations help save placement costs by reducing application component count. Ordering Information Resistor Resistor RoHS Model Value Tolerance Compliant S41X083 103 J P Package Code Package Code Code Tolerance 1 S40X043 S42C043 J 5% 2 S41X043 S42X083 G 2% 3, 4 S41X083 S42C083 F 1% S41C083 S42C163 Zero Ohm X Resistor Value * Termination Code Code 103 10k ohm P Matte Sn Finish * See Addendum for Standard EIA Values and Codes Notes: Standard tolerance is 5% and available for all S40, S41 and S42 package codes 3-digit resistor codes. 1. Optional tolerance at 2% is available for all S41 and S42 package codes 3-digit resistor codes. 2. 3. Optional tolerance at 1% is available for all S41, S42C043, S42X083 and S42C083 package codes 3-digit resistor codes. Consult factory for availability with S42C163 package code. 4. Not all performance combinations and resistor values may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC 008-0546-0 Rev. A Page 1 of 6 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. S4x Series Sulfur Resistant Chip Resistor Arrays Ordering Information Part Number Examples 3-Digit Code Tolerance / J G F Value 5% 2% 1% 10 Ohms S42C083100JP S42C083100GP S42C083100FP 120 Ohms S42C083121JP S42C083121GP S42C083121FP 1k Ohms S42C083102JP S42C083102GP S42C083102FP 68k Ohms S42C083683JP S42C083683GP S42C083683FP 3-Digit Resistor Code st nd rd 1 and 2 digits are resistor value, 3 digit is number of zeros. Ex. 102 = 1,000 ohm = 1k ohm Ex. 683 = 68,000 ohm = 68k ohm Electrical & Environmental Specifications Operating Conditions Resistanc e +70C Power PCB Area Resistance O perating Maximum Maximum Circuit Temperature 1 2 Package Per Resistor Range Temperature O perating O verload Toleranc e Per Resistor Type Coeffic ient Sq. Inch ohm Range Voltage Voltage % Watts S40 0.0008 Isolated 10 - 1M 0.031 12.5V 25V 5% Std. S41X 043 0.0015 Isolated 10 - 1M 0.063 50V 100V or S41X 083 0.0015 Isolated 10 - 1M -55C to +125C 200ppm/C 0.031 50V 100V 0.5 ohm S41C083 0.0015 Isolated 10 - 1M 0.03125 50V 100V whichever is greater S42 0.0037 Isolated 10 - 1M 0.063 50V 100V 1. Standard product tolerance is 5%. Reference Ordering Information for availability of 2% and 1% tolerances. 2. Total Rated Package Power equals total number of resistors times rated Power Per Resistor. Derating Curve Typical With the rated ambient temperature set to +70C, the maximum power maximum current for 0 product at a temperature of no more than rated ambient temperature shall be equal to the rated power rate current for 0 product . The maximum power at a temperature exceeding the rated ambient temperature shall be a value determined by reducing the rated power according to the power reduction curve in the figure below. 100 80 60 40 20 0 -55 0 +70 +125 Ambient Temperature C DOC 008-0546-0 Rev. A Page 2 of 6 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Rated Power Ratio %