Additional Resources: Product Page 3D Model PCB Footprint date 05/25/2021 page 1 of 10 SERIES: PDQ30-D DESCRIPTION: DC-DC CONVERTER FEATURES up to 30 W isolated output industry standard 1 x 1 package 4:1 input range single/dual regulated output over voltage, input under voltage lockout, and short circuit protections 1,500 Vdc isolation voltage five-sided shielded case remote on/off control output trim -40 to 105C temperature range efficiency up to 90% EN 62368-1 meets UL 62368-1 input output output output ripple efficiency MODEL 1 voltage voltage current power & noise typ range min max max max typ (Vdc) (Vdc) (Vdc) (A) (A) (W) (mVp-p) (%) PDQ30-Q24-S3-D 24 9~36 3.3 0 7.5 24.75 75 88 PDQ30-Q24-S5-D 24 9~36 5 0 6.0 30 75 90 PDQ30-Q24-S12-D 24 9~36 12 0 2.5 30 100 89 PDQ30-Q24-S15-D 24 9~36 15 0 2.0 30 100 89 PDQ30-Q24-D12-D 24 9~36 12 0 1.25 30 100 88 PDQ30-Q24-D15-D 24 9~36 15 0 1.0 30 100 88 PDQ30-Q48-S3-D3 48 18~75 3.3 0 7.5 24.75 75 88 PDQ30-Q48-S5-D3 48 18~75 5 0 6.0 30 75 90 PDQ30-Q48-S12-D3 48 18~75 12 0 2.5 30 100 89 PDQ30-Q48-S15-D3 48 18~75 15 0 2.0 30 100 89 PDQ30-Q48-D12-D3 24 18~75 12 0 1.25 30 100 88 PDQ30-Q48-D15-D3 48 18~75 15 0 1.0 30 100 89 Notes: 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, with 10 F tantalum and 1 F ceramic capacitors on the output. 2. All specifications are measured at Ta=25C, nominal input voltage, and rated output load unless otherwise specified. 3. CE does not apply to 48 Vin models. PART NUMBER KEY PDQ30 - QXX - X XX - D Base Number Packaging Style: Output Voltage D = DIP Input Voltage Output S = single D = dual cui.comAdditional Resources: Product Page 3D Model PCB Footprint CUI Inc SERIES: PDQ30-D DESCRIPTION: DC-DC CONVERTER date 05/25/2021 page 2 of 10 INPUT parameter conditions/description min typ max units 24 Vdc input models 9 24 36 Vdc operating input voltage 48 Vdc input models 18 48 75 Vdc for maximum of 100 ms surge voltage 24 Vdc input models 50 Vdc 48 Vdc input models 100 Vdc 24 Vdc input models 3.9 A current 48 Vdc input models 1.95 A 24 Vdc input models, power up 8.5 Vdc 24 Vdc input models, power down 8.0 Vdc under voltage shutdown 48 Vdc input models, power up 17 Vdc 48 Vdc input models, power down 16 Vdc turn on (3.5~75 Vdc or open circuit) 1 remote on/off turn off (<1.2 Vdc) filter pi filter input reverse polarity protection no 6 A time delay fuse for 24 Vdc input models (recommended) input fuse 3 A time delay fuse for 48 Vdc input models (recommended) Notes: 1. CMOS or open collector TTL, reference to Vin. OUTPUT parameter conditions/description min typ max units 3.3 Vdc output models 7,500 F 5 Vdc output models 6,000 F 12 Vdc output models 2,500 F maximum capacitive load 15 Vdc output models 2,000 F 12 Vdc output models 1,250 F 15 Vdc output models 1,000 F voltage accuracy 1.5 % from high line to low line line regulation single output models 0.2 % dual output models 0.5 % from full load to minimum load load regulation single output models 0.2 % dual output models 1.0 % voltage balance dual output models 1.5 % load cross variation 10%/100% (dual output cross regulation 5 % models) turn-on delay time, from input from Vin, min to 10% Vo 10 ms turn-on delay time, from from Von/off to 10% Vo 10 ms on/off control rise time from 10% Vo to 90% Vo 10 ms 2 adjustability see application notes 10 % 3.3, 5 Vdc output models 270 kHz switching frequency all other models 330 kHz 75%-100% step load change dynamic load response error band (Vout) 5 % recovery time 250 s temperature coefficient 0.03 %/C Note: 2. For single output models only. cui.com