TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 48W 1 Phase / DRP-24V48W1AZ Highlights & Features Universal AC input voltage range Power will not de-rate for the entire input voltage range Rugged and compact design (Vibration 5 G, Shock 30 G) Conforms to harmonics current IEC/EN 61000-3-2, Class A Wide operating temperature range -20C to 70C Overvoltage / Overcurrent / Over Temperature / Short Circuit Protections Certified according to IEC/EN/UL 62368-1 Safety Standards CB Certified for worldwide use Model Number: DRP-24V48W1AZ Unit Weight: 0.22 kg (0.49 lb) Dimensions (L x W x D): 100 x 32 x 100.6 mm (3.94 x 1.26 x 3.96 inch) General Description The DRP-24V48W1AZ has a power rating of 48W with 24V output voltage. Its rugged plastic casing has a compact body at only 32 mm wide and operates within a wide temperature range from -20C to 70C. Like its CliQ predecessors, the DRP-24V48W1AZ comes with universal AC input and complies with major industrial standards like UL 508 (Safety for Industrial Control Equipment), EMI according to EN 55011 (Industrial, scientific and medical (ISM) radio-frequency equipment) and EMS according to EN 61000-6-2 (Immunity for industrial environments). For broader application compatibility, the product is also certified for ITE (Information Technology Equipment) standard according to IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1 Audio/video, Information and Communication Technology Equipment. Model Information CliQ DIN Rail Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current DRP-24V48W1AZ 85-264 Vac (120-375 Vdc) 24 Vdc 2.00 A Model Numbering DR P 24V 48W 1 A Z DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ Series Plastic Case All parameters are specified at 25C ambient and AC input unless otherwise indicated. 1 www.DeltaPSU.com (September 2021, Rev. 06) TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 48W 1 Phase / DRP-24V48W1AZ Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240 Vac Input Voltage Range 85-264 Vac Nominal Input Frequency 50-60 Hz Input Frequency Range 47-63 Hz Nominal DC Input Voltage 125-250 Vdc DC Input Voltage Range* 120-375 Vdc Input Current < 1.40 A 115 Vac, < 0.70 A 230 Vac Efficiency at 100% Load > 87.0% 115 Vac & 230 Vac Max Power Dissipation 0% load < 0.3 W 115 Vac & < 0.5 W 230 Vac 100% load < 7.0 W 115 Vac & 230 Vac Max Inrush Current (Cold Start) < 28 A 115 Vac, < 56 A 230 Vac Leakage Current < 1 mA 240 Vac *Fulfills tested conditions Output Ratings / Characteristics** Nominal Output Voltage 24 Vdc Factory Set Point Tolerance 24 Vdc 1% Output Voltage Adjustment Range 22-26 Vdc Output Current 2.00 A (48 W max.) Output Power 48 W Line Regulation < 1.0% ( 85-264 Vac input, 100% load) Load Regulation < 1.0% ( 85-264 Vac input, 0-100% load) PARD*** (20 MHz) < 480 mVpp Rise Time < 50 ms nominal input (100% load) Start-up Time < 3,000 ms nominal input (100% load) Hold-up Time > 10 ms 115 Vac, > 60 ms 230 Vac (100% load) Dynamic Response 5% 85-264 Vac input, 10-100% load (Overshoot & Undershoot O/P Voltage) (Slew Rate: 0.1 A/ s, 50% duty cycle 5 Hz to 1 KHz) Start-up with Capacitive Loads 1,000 F Max **For power de-rating from 50C to 70C, see power de-rating on page 3. ***PARD is measured with an AC coupling mode, 5 cm wires, and in parallel with 0.1 F ceramic capacitor. All parameters are specified at 25C ambient and AC input unless otherwise indicated. 2 www.DeltaPSU.com (September 2021, Rev. 06)