FEATURES High efficiency: 95.3% 11.8V/42A Size: 58.4 x 36.8 x 12.7mm (2.30x1.45x0.50) PMBus Rev.1.2 compliance Industry standard, DOSA compliant pin out Can be connected in parallel directly Parallel and Droop current sharing Fixed frequency operation Input UVLO, Output OCP & OVP, OTP Monotonic startup into normal and Pre-biased loads 2250V Isolation and basic insulation No minimum load required ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950-1 (US & Canada) to be recognized Delphi Series Q48SG Quarter Brick Family Full Digital Control DC/DC Power Modules: 48V In, 11.8V/42A Out OPTIONS Digital PMBus interface The Delphi Series Q48SG, 38~75V input, isolated single output, Parallel and Droop Current sharing Quarter Brick, are full digital control DC/DC converters, and are the Trim latest offering from a world leader in power systems technology and Positive On/Off logic manufacturing Delta Electronics, Inc. The Q48SG series provide up to 500 watts of power in an industry standard, DOSA compliant Short pin lengths available footprint and pin out the typical efficiency is 95.3% at 48V input, 11.8V output and 42A load. There is a built-in digital PWM controller in the Q48SG series, which is used to complete the Vo feedback, PWM signal generation, droop current sharing, fault protection, and PWBUS communications, and so on. With the digital control, many APPLICATIONS design and application flexibility, advanced performance, and Telecom / DataCom reliability are obtained and the Q48SG series can be connected in Wireless Networks parallel directly for higher power without add external oring-fet. Optical Network Equipment Server and Data Storage Industrial/Test Equipment Datasheet DS Q48SG12042 05092014 TECHNICAL SPECIFICATIONS (T =25C, airflow rate=300 LFM, V =48Vdc, nominal Vout unless otherwise noted.) A in PARAMETER NOTES and CONDITIONS Q48SG12042 (Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous 80 Vdc Transient (100ms) 100ms 100 Vdc On/off Pin Voltage -50 50 V Trim/Current Sharing, C2, Data, SMBAlert, Clock, Addr1, Other Pin Voltage -0.3 3.6 V Addr0 Operating Ambient Temperature -40 85 C Storage Temperature -55 125 C Input/Output Isolation Voltage 2250 Vdc INPUT CHARACTERISTICS Operating Input Voltage 38 75 Vdc Input Under-Voltage Lockout Turn-On Voltage Threshold 32.5 34 35.5 Vdc Turn-Off Voltage Threshold 30.5 32 33.5 Vdc Lockout Hysteresis Voltage 1 2 3 Vdc Maximum Input Current Vin=38V, 100% Load, 13.75 14 A No-Load Input Current 75 110 mA Off Converter Input Current 18 23 mA 2 2 Inrush Current(I t) With 100uF external input capacitor 1 A s Start up Current Peak, Vin=36V, 100% Load, With 5000uF Co 15 22.5 A Input Terminal Ripple Current RMS, With 100uF input cap. 0.32 0.48 A Input Reflected-Ripple Current P-P thru 12H inductor, 5Hz to 20MHz 10 mA Input Voltage Ripple Rejection 120 Hz 50 dB OUTPUT CHARACTERISTICS The module without droop current sharing option code Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25C 11.75 11.8 11.85 Vdc Output Voltage Regulation Over Load Io=Io,min to Io,max 20 60 mV Over Line Vin=38V to 75V 20 50 mV Over Temperature Tc=-40C to 125C 120 mV Total Output Voltage Range over sample load, and temperature, from 38~75V Vin 11.6 11.8 12.0 V The module with droop current sharing option code Output Voltage Set Point Vin=48V, Io=0A, Tc=25C 12.25 12.3 12.35 Vdc Output Voltage Regulation Over Load Io=Io,min to Io,max 500 600 mV Over Line Vin=38V to 75V 20 50 mV Over Temperature Tc=-40C to 125C 120 mV Total Output Voltage Range over sample load, and temperature, from 38~75V Vin 11.5 12.3 12.5 V Both With and without droop current sharing option code Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth Peak-to-Peak Full Load, 1F ceramic, 10F tantalum 150 250 mV RMS Full Load, 1F ceramic, 10F tantalum 60 100 mV Operating Output Current Range Full input voltage range 0 42 A Output DC Current-Limit Inception Output Voltage 10% Low 110 150 % Output Voltage Trim Range Vin=48V -20 10 % DYNAMIC CHARACTERISTICS Output Voltage Current Transient 48V, 10F Tan & 1F Ceramic load cap, 0.1A/s Positive Step Change in Output Current 50% Io.max to 75% Io.max 200 400 mV Negative Step Change in Output Current 75% Io.max to 50% Io.max 200 400 mV Setting Time (within 1% Vout nominal) 300 s Turn-On Transient Start-Up Time, From On/Off Control 100 120 ms Start-Up Time, From Input 110 130 ms Output Capacitance 220 16000 F EFFICIENCY 100% Load Vin=48V 94.5 95.3 % 60% Load Vin=48V 95.5 96.3 % ISOLATION CHARACTERISTICS Input to Output 2250 Vdc Isolation Resistance 10 M Isolation Capacitance 1500 pF FEATURE CHARACTERISTICS Current sharing accuracy 10 % Switching Frequency 130 kHz ON/OFF Control Logic Low Von/off -0.7 0.8 V Logic High Von/off 2.4 50 V ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 0.5 mA ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=2.4V 10 A Leakage Current (for both remote on/off logic) Logic High, Von/off=15V 50 A Output Voltage Trim Range Vin=48V, Pout max rated power -20 10 % Output Over-Voltage Protection Over full temp range % of nominal Vout 14 17 V 2 DS Q48SG12042 05092014