X-On Electronics has gained recognition as a prominent supplier of PETG-1.75-SUPER BLUE Printers across the USA, India, Europe, Australia, and various other global locations. PETG-1.75-SUPER BLUE Printers are a product manufactured by Devil Design. We provide cost-effective solutions for Printers, ensuring timely deliveries around the world.
We are delighted to provide the PETG-1.75-SUPER BLUE from our Printers category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the PETG-1.75-SUPER BLUE and other electronic components in the Printers category and beyond.
Devil Design Sp. J. Zwirki i Wigury 65 43-190 Mikolow Poland Product card: PET-G filament for 3D printing. Product description: Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is a material friendly for beginners, material available in covering and transparent colors. Physical properties of the product: Diameter of lament 1.75 mm / 2.85 mm Dimensional tolerance of lament +/- 0.05 mm Roundness of lament +/- 0.02 mm Surface of the material High Gloss Shrinkage of the material Very low Product weight 1.0 kg net, 1.4 kg gross Spool - material Transparent policarbonate Weight of the empty spool ~257 g The diameter of the spool 200 mm ~70 mm Width of spool Diameter of mounting hole 52 mm Packaging Printed cardboard Package size ~230x210x80 mm Vacuum packing Yes Moisture absorber Yes Suggested printing parameters: Hotend 220-250C Heated bed 70-80C Cooling the printout Optional Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally. www.devildesign.comDevil Design Sp. J. Zwirki i Wigury 65 43-190 Mikolow Poland Physical properties of the material: Specific Density 1.23 g/cm3 - Glass Transition Temperature 80C ASTM 3418 Moisture 0.3% - Availability of colors and diameters: Color Kolor 1.75 2.85 White Biay & & Bright Yellow Jasnoty & & Orange Pomaraczowy & Red Czerwony & & Gray Szary & Blue Bkitny & Super Blue Niebieski & & Bright Green Jasnozielony & & Black Czarny & & Transparent Transparentny & Bright Yellow Transparent Jasnoty Transparentny & Bright Green Transparent Jasnozielony Transparentny & Ruby Red Transparent Rubinowy Transparentny & Blue Transparent Bkitny Transparentny & www.devildesign.com