DEVICE SERVER MODULE DIGI CONNECT ME Secure device server module with plug-and-play functionality and professional development tools for custom applications The Digi Connect ME is a secure device server module that BLOCK DIAGRAM delivers complete and versatile embedded IPv6-ready network DIGI CONNECT ME connectivity and strong standards-based encryption services - such as SSL/SSH. Built on leading Digi 32-bit NET+ARM RJ 45 w/Integrated Magnetics JTAG technology, the Digi Connect ME is cost effective and easy Connector to use in existing and new product designs, while powerful enough to meet future product performance needs. The connector-style module is pin-compatible and interchangeable with the Digi Connect Wi-ME, providing a direct migration path to a wireless solution without the traditional complexities PHY of hardware and software integration work. JTAG UART ARM Digi Connect ME is available pre-loaded with Digi plug-and- play firmware, which eliminates software development ARM7TDMI 2 / 4 10 / 100 efforts by providing powerful and configurable IPv4/IPv6 FLASH 55 MHz Ethernet MAC device server functionality, including an easy-to-use web user interface and security features. Target applications include Mem Ext Bus UART GPIO Ctrlr I/F retail systems, security/access control, medical devices and 8 MB SDRAM building/industrial automation. BENEFITS Compact and secure 32-bit device server modules 20-Pin Connector Complete family of pin-compatible module solutions Integrated 10/100 Mbit Ethernet interface Strong enterprise-grade network security Highly integrated low emission design (FCC Class B) Extended and industrial operating temperature Digi processor and WLAN technology for true RELATED PRODUCTS long-term availability Digi Connect ConnectCore ConnectCard Digi XBee Development ME/Wi-ME 9210 9P 9215 for i.MX28 KitsSPECIFICATIONS Digi Connect ME HARDWARE 32-bit Digi NS7520 processor PROCESSOR TYPE ARM CORE ARM7TDMI PROCESSOR SPEED 55 MHz 2/4 MB NOR flash MEMORY BASE POPULATION 8 MB SDRAM RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR) PINS/FORM FACTOR Up to 230 Kbps data rate Full signal support for TXD, RXD, RTS, CTS, DTR, DSR and DCD Hardware/Software flow control HIGH-SPEED TTL SERIAL INTERFACE GPIO Up to 10 shared with 1 external IRQ ON-MODULE POWER SUPERVISOR Yes JTAG INTERFACE NET+OS development modules only WAVE-SOLDERABLE DESIGN No clean flux process 1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.854 in (21.69 mm) DIMENSIONS (L X W X H) NETWORK INTERFACE - WIRED STANDARD IEEE 802.3 PHYSICAL LAYER 10/100Base-T DATA RATE 10/100 Mbps (auto-sensing) MODE Full- or half-duplex (auto-sensing) RJ-45 CONNECTOR Yes INTEGRATED ETHERNET MAC/PHY POE POWER PASS-THROUGH Yes (see website for available options) ENVIRONMENTAL OPERATING TEMPERATURE -40 C to +85 C (-40 F to +185 F) STORAGE TEMPERATURE -50 C to +125 C (-58 F to +257 F) 5% to 90% (non-condensing) RELATIVE HUMIDITY 12,000 feet (3,658 meters) ALTITUDE POWER REQUIREMENTS (3.3V) MAXIMUM 270 mA (891 mW) REGULATORY APPROVALS FCC PART 15 CLASS B, EN 55022 CLASS B Yes EN 61000-3-2 AND EN 61000-3-3 Yes ICES-003 CLASS B, VCCI CLASS II, Yes AS 3548 Yes FCC PART 15 SUB C SECTION 15.247 IC RSS-210 ISSUE 5 SECTION 6.2.2(O) Yes Yes EN 300 328, EN 301 489-17 UL 60950-1, EN 60950 (EU) Yes Yes CSA C22.2, NO. 60950 EN 55024 Yes WWW.DIGI.COM