PI5A3167CCEX Diodes Incorporated

PI5A3167C Low Voltage SPST 0.8 Analog Switch Features Description CMOS Technology for Bus and Analog The PI5A3167C is a high-bandwidth, fast single-pole Applications single-throw (SPST) CMOS switch. It can be used as an Low On-Resistance: 0.8 at 3.0V analog switch or as a low-delay bus switch. The device Wide V Range: 1.65V to 5.5V features ultra low RON of 0.8 typical at 3.0V VCC CC Rail-to-Rail Signal Range and will operate over the wide VCC range of 1.65V to Control Input Overvoltage Tolerance: 5.5V 5.5V. Fast Transition Speed: 2ns at 5.0V The PI5A3167C features very low quiescent current High Bandwidth: 200 MHz even when the control voltage is lower than the VCC I/O pins Have Power-off Protection Functions supply. This feature services the mobile handset Extended Industrial Temperature Range: applications very well by allowing direct interface with -40C to 85C baseband processor general purpose I/Os. Packaging (Pb-free & Green): The control input, S, is independent of supply voltage. -5-pin SOT23 -5-pin SC70 Applications Cell Phones PDAs Portable Instrumentation Battery powered Communications Computer Peripherals Pin Assignment B V 1 5 CC A 2 GND S 3 4 SOT23 and SC70 Package (Top View) Pin Description Pin No Pin Name Description Logic Function Table 1 B Data Port (normally connect) Logic Input(S) Function(A to B) 2 A Common Output/Data Port 3 GND Ground 0 ON 4 S Logic Control 1 OFF 5 VCC Positive Power Supply 12-09-0002 PT0453 09/29/12 1 PI5A3167C Low Voltage SPST 0.8 Analog Switch Maximum Ratings Note: Storage Temperature...-65 to +150 Stresses greater than those listed under MAXIMUM Ambient Temperature with Power Applied......................-40 to +85 RATINGS may cause permanent damage to the Supply Voltage V ..-0.5V to +7.0V CC device. This is a stress rating only and functional DC Switch Voltage V ...-0.5V to +7.0V S operation of the device at these or any other DC Input Voltage V ..-0.5V to +7.0V conditions above those indicated in the operational IN DC Output Current V .128mA sections of this specification is not implied. OUT Exposure to absolute maximum rating conditions DC V or Ground Current I /I 100mA CC CC GND for extended periods may affect reliability. Junction Temperature under Bias (TJ) ...........................................150C Junction Lead Temperature (TL) (Soldering, 10 seconds) ................................................................ 260C ESD HBM .................................................................................4KV Power Dissipation (PD) +85C ...................................SOT23 250mW SC70 200mW Recommended Operating Conditions Symbol Parameter Conditions Min. Typ. Max. Unit V Operating Voltage - 1.65 - 5.5 V CC V DC Input Voltage - 0 - V V IN CC V Switch Input Voltage - 0 - 5.5 V S V Output Voltage - 0 - V V OUT CC T Operating Temperature - -40 25 85 C A Control Input VCC = 2.7V to 3.6V 0 - 10 ns/V Input Rise and Fall Time t , t r f Control Input VCC = 4.5V to 5.5V 0 - 5 ns/V Note: Control input must be held HIGH or LOW it must not float. 12-09-0002 PT0453 09/29/12 2