WA22, WA22P, & WA27F Pneumatic Indent Crimp Tools The DMC Power Crimp tools same indenter configuration, the UPPER RANGE WA27F WA27F, WA22P and WA22 are direct same gaging dimensions and selector (EQUIVALENT TO AF8) equivalents of their corresponding settings. No additional operator training accommodates TH-xxx MIL-standard hand tools. They use the same turret is necessary. Accurate calibration and commercial series turret heads or heads or positioners, gages and other is maintained by a unique 8 step TP-xxx MIL-standard and commercial accessories. As production needs machined steel block that holds gaging series positioners, length 10, diameter grow, all that needs to be added is tolerances far longer than the usual 2 3/4, weight 50 oz. the tool frame itself. The resulting adjustment screw method. This solid power capability can in many instances gaging means high output with less MIDDLE RANGE WA22P compare with an automated system downtime. (EQUIVALENT TO MH860) costing thousands of dollars more. The compact size and light weight accommodates MIL-standard and These pneumatic tools are widely of these tools allows them to be used commercial 86-xxx series positioners, used in both military and proprietary easily as hand tools, as well as high length 8, diameter 2 1/4, weight programs. Their popularity has production bench tools. The hand 32 oz. come about in part because of their trigger is designed for equal ease of unequaled reputation for trouble-free, use by right or left handed operators. dependable service and their cost Bench mounted, the optional foot valve LOWER RANGE WA22 saving and adaptability. allows hands-free operation. The bench (EQUIVALENT TO AFM8) Whether upper, middle , lower, or mount will allow the tool to be secured accommodates MIL-standard and mid-current range, the power tools fulfill at virtually any angle for individual commercial Kxxx series positioners, the same precise crimp requirements comfort, thereby minimizing operator length 8, diameter 2 1/4, weight as the hand models. They use the fatigue. 32 oz. DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA PHONE (407) 855-6161 FAX (407) 855-6884 www.DMCTools.com E-MAIL: DMC DMCTools.com COPYRIGHT 2011 Daniels Manufacturing Corp. ALL RIGHTS RESERVED 08/11 WA22-WA27F Tools-SLPneumatic Indent Crimp Tools and Accessories WA27-309-2C WA27-300BT-EP WA27-309 is the pneumatic equivalent MID-CURRENT RANGE to the M309, covering the lower 4 PNEUMATIC TOOLS selector settings for AWG sizes 12-18, WA27-300BT-EP is designed for pin 3 length 10 , diameter 2 4 , weight 50 oz. and socket contracts, AWG sizes 6-14. This tool is the pneumatic equivalent to 3 WA27-309-EP is the pneumatic the M300BT, length 15 , diameter 2 4 , equivalent to the M309, with an extra weight 119 oz. pneumatic cylinder which provides more power for crimping the upper 4 selector WA27-309-2C is the pneumatic settings for AWG sizes 8-14, length 15 , equivalent to the M309, covering all 8 3 diameter 2 4 , weight 119 oz. selector settings, length 12 , diameter 3 2 4 , weight 80 oz.. FOOT VALVE - WA10A The foot valve, when installed in-line with an air supply, makes a portable system which is adaptable to any work bench. Air supply requirements are 80-120 PSI (5.5 to 8.0 atmospheres) clean dry air. The system uses standard air fittings readily available in most shops. The WA22LC-X1 tool features a WA22LC-X1 HAND-HELD smaller profile and lighter weight which PNEUMATIC CRIMP TOOL makes it especially useful for second The same basic WA22 tool that is end terminations on vertical and commonly bench mounted for first end horizontal wiring form boards. Most terminations is now available in a lighter, size 20 and smaller contacts can be more ergonomic version for hand-held BENCH MOUNT - BM-2A terminated with this tool. operation. The fully adjustable bench mount is compatible with most DMC power tools. The base measures 4 x 8 and can be used attached or unattached to the work surface. DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA PHONE (407) 855-6161 FAX (407) 855-6884 www.DMCTools.com E-MAIL: DMC DMCTools.com COPYRIGHT 2011 Daniels Manufacturing Corp. ALL RIGHTS RESERVED 08/11 WA22-WA27F Tools-SL