4183X30 Dremec

spacer bolt Polyamide with brass thread up to width across ats 10 mm Standard range spacer bolts Plastic (Polyamide), hexagon with brass thread EXECUTION DII Internal / internal thread Order No. SW* (hexagon) Thread Lengths (L) in mm increments L1 L1 1182 x (length) SW6 M2.5 1565 1183 x SW6 M3 1565 1186 x SW8 M4 1565 1188 x SW10 M5 1570 L Order No. SW* (hexagon) Thread Lengths (L) EXECUTION DIA Internal / external thread in mm increments L1 2182 x (length) SW6 M2.5 1565 2183 x SW6 M3 1565 2186 x SW8 M4 1565 2188 x SW10 M5 1570 L2 L *SW: width across ats Ordering example: 2188 x 45 = DIA / MS Polyamide / SW10 / M5 x 45 18 Hotline: 0700-Dremec DE (0700-37 363 233) Telefon +49 (0)57 31 . 15 30 00 Fax +49 (0)57 31 . 15 33 00 30 G1 G2 G2 G2 Body material: Polyamide 6.6 white Available from stock. Delivery times for Thread inserts: Nickel-plated brass intermediate lengths and special versions Temperature resistance: up to 110C upon request. Fire class: UL 94-V2 12 Contact resistance: 10 Ohm/cm -- Note: The pull-out strength and torques may vary Dielectric strength: 50kV/mm depending on application and ambient in uences Tolerance for length dimensions: +/- 0.1 mm (e.g. temperature, air humidity, etc.). For critical applications please carry out trials. DREMEC GmbH does not assume any liability for the speci ed strength values. EXECUTION DAA External / external thread Order No. SW* (hexagon) Thread Lengths (L) in mm increments 4182 x (length) SW6 M2.5 1565 4183 x SW6 M3 1565 4186 x SW8 M4 1565 L2 L L2 4188 x SW10 M5 1570 SW Strength/resistance values Thread lengths mm Torques Nm Pull-out torques N G1=G2 L1 L2 SW6 M2.5 1.3 SW6 M2.5 300 M2.5 6 6 SW6 M3 1.3 SW6 M3 300 M3 6 6 SW8 M4 3.0 SW8 M4 600 M4 6 8 SW10 M5 4.5 SW10 M5 800 M5 6 10 19 E-Mail: mail dremec.de Internet: www.dremec.de Portal: www.dremec.net G1 G1