X-On Electronics has gained recognition as a prominent supplier of D01356 Standoffs & Spacers across the USA, India, Europe, Australia, and various other global locations. D01356 Standoffs & Spacers are a product manufactured by Duratool. We provide cost-effective solutions for Standoffs & Spacers, ensuring timely deliveries around the world.
We are delighted to provide the D01356 from our Standoffs & Spacers category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the D01356 and other electronic components in the Standoffs & Spacers category and beyond.
Circuit Board Spacers SPLSN Series Dimensions PART NUMBER Mounting Holes Applicable Thickness A B PCB Chassis PCB Chassis 1645287 4.9 7.1 4 4.8 0.8~1.6 0.5~2.0 1645288 6.2 8.4 4 4.8 0.8~1.6 0.5~2.0 1645289 9.4 11.6 4 4.8 0.8~1.6 0.5~2.0 1645290 11.0 13.2 4 4.8 0.8~1.6 0.5~2.0 1645291 12.5 14.7 4 4.8 0.8~1.6 0.5~2.0 1645292 15.7 17.9 4 4.8 0.8~1.6 0.5~2.0 1645293 18.9 21.1 4 4.8 0.8~1.6 0.5~2.0 1645294 22.0 24.2 4 4.8 0.8~1.6 0.5~2.0 1645295 25.1 27.3 4 4.8 0.8~1.6 0.5~2.0 1645296 28.3 30.5 4 4.8 0.8~1.6 0.5~2.0 1645297 31.5 33.7 4 4.8 0.8~1.6 0.5~2.0 1645299 34.6 36.8 4 4.8 0.8~1.6 0.5~2.0 Firmly and accurately maintains a constant distance between Material: Nylon 66 Flammability: UL94V-2 the chassis and PC board Colour: Natural Quick and easy to install Easy to remove from the PC board RoHS Directive 2002/95/EC compliant RoHS The mid-section design of 1645287 is different Material Properties Values measured at 23C 50% RH Mechanical/Physical Properties Units Value 3 Density g/cm 1.14 Water Absorption % 2.8 Tensile Strength at Break MPa 50 Elongation at Yield % 30 Tensile Modulus GPa 1.50 Electrical Properties Units Value Electrical Resistivity ohm-m 3.00e+13 Surface Resistivity ohm 3.00e+14 Electrical Strength MV/m 26 Thermal Properties Units Value Melting Point C 263 Short Term Minimum Working Temperature C -40 Short Term Maximum Working Temperature C 100 Flammability UL94 V2 Above information is for guidance only and should not be used to establish specifications or as the basis of a designCircuit Board Spacers SPD Series Dimensions PART NUMBER Mounting Holes Applicable Thickness A B PCB Chassis PCB Chassis 1645300 4.6 8.9 4.0 4.0 1.6 0.5~2.0 1645302 5.9 10.2 4.0 4.0 1.6 0.5~2.0 1645303 9.1 13.4 4.0 4.0 1.6 0.5~2.0 1645305 10.7 15.0 4.0 4.0 1.6 0.5~2.0 1645306 12.2 16.5 4.0 4.0 1.6 0.5~2.0 1645307 15.4 19.7 4.0 4.0 1.6 0.5~2.0 1645308 18.6 22.9 4.0 4.0 1.6 0.5~2.0 1645309 21.7 26.0 4.0 4.0 1.6 0.5~2.0 Material: Nylon 66 Fixes the chassis and PC board at a constant distance between each other Flammability: UL94V-2 Uses 4 mounting holes on both the chassis and PC board Colour: Natural RoHS Directive 2002/95/EC compliant RoHS Material Properties Values measured at 23C 50% RH Mechanical/Physical Properties Units Value 3 Density g/cm 1.14 Water Absorption % 2.8 Tensile Strength at Break MPa 50 Elongation at Yield % 30 Tensile Modulus GPa 1.50 Electrical Properties Units Value Electrical Resistivity ohm-m 3.00e+13 Surface Resistivity ohm 3.00e+14 Electrical Strength MV/m 26 Thermal Properties Units Value Melting Point C 263 Short Term Minimum Working Temperature C -40 Short Term Maximum Working Temperature C 100 Flammability UL94 V2 Above information is for guidance only and should not be used to establish specifications or as the basis of a design