405F/2H ebm papst

Tin-plated 3 Max. 9 m /h DC axial fans 40 x 10 mm 1) Material: Housing: GRP (PBT) Possible special versions: 1) Impeller: GRP (PA) (See chapter DC fans - specials) Direction of air flow: Exhaust over struts - Speed signal Direction of rotation: Counterclockwise, - Go / NoGo alarm looking towards rotor - Moisture protection Connection: Via single wires AWG 28, TR 64 Highlights: Some models are suitable for use at high ambient temperatures Weight: 17 g 1) Fiberglass-reinforced plastic Series 400 F Nominal data 3 -1 Type m /h cfm VDC VDC dB(A) Bel(A) / Watts rpm C Hours Hours 405 F 8 4.7 5 4.5...5.5 22.1 4.4 0.7 5 400 -20...+70 45 000 / 17 500 47 500 405 FH 9 5.3 5 4.5...5.5 26.0 4.6 0.9 6 000 -20...+70 45 000 / 17 500 47 500 412 FM 6 3.5 12 10...14 17.0 3.8 0.5 4 300 -20...+70 45 000 / 17 500 47 500 412 F 8 4.7 12 10...14 22.1 4.4 0.7 5 400 -20...+70 45 000 / 17 500 47 500 412 FH 9 5.3 12 10...14 26.0 4.6 0.8 6 000 -20...+70 45 000 / 17 500 47 500 414 F 8 4.7 24 20...28 22.1 4.4 0.8 5 400 -20...+70 45 000 / 17 500 47 500 414 FH 9 5.3 24 21.6...26.4 26.0 4.4 0.9 6 000 -20...+70 45 000 / 17 500 47 500 Model with temperature range up to +85 C. 412 FM-074 6 3.5 12 10...14 17.0 3.8 0.4 4 300 -20...+85 45 000 / 17 500 47 500 412 F-130 8 4.7 12 10...14 22.1 4.4 0.6 5 400 -20...+85 45 000 / 17 500 47 500 412 FH-132 9 5.3 12 10...14 26.0 4.6 0.8 6 000 -20...+85 45 000 / 17 500 47 500 Subject to change Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level L A ISO 103002 W measured on a hemisphere with a radius of 2 m. Sound pressure level L A measured at 1 m distance from p fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation For detailed information see