ECS-CTE-10.00-33-TR ECS Inc

ECS-CTE SMD Ceramic Resonator The ECS-CTE Series miniature SMD ceramic resonator includes built in capacitors for reduced component count. The SMD Ceramic resonator is a low cost frequency control solution when absolute Request a Sample frequency accuracy is not important. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECS-CTE SMD RESONATOR PARAMETERS CONDITIONS ECS-CTE UNITS MIN TYP MAX Frequency 8.00 12.00 MHz Frequency Tolerance +25C 0.5 % Frequency Stability -40 ~ +85C 0.2 % Equivalent Series 40 Resistance (ESR) Built-In Capacitors * Specify in P/N 15 pF (20% Tolerance) Withstanding Voltage DC, 1 Min 50 V 3.2 x 1.3 mm package Industry Standard footprint DC Voltage 6 V Extended Temp. Range Voltage Rating AC Voltage 15 Vp-p Built-in Caps Insulation Resistance 10V, 1 Min. 500 M DIMENSIONS (mm) Operating Temperature Topr -40 +85 C Storage Temperature Tstg -55 +85 C Aging (10 Years) +25C 3C 0.2 % PAD CONNECTIONS 1 In/Out 2 Gnd 3 Out/In Figure 2) Suggested Land Pattern Figure 1) Top, Side, and Bottom views PART NUMBERING GUIDE: Example ECS-CTE-10.00-15-TR ECS -CTE FREQUENCY Built In PACKAGING CAPACITANCE 10.00 = 10.000 MHz Standard TR = *See Developed 15 = 15 pF Tape Frequencies Pg. 2 10 = 10 pF & Reel 22 = 22 pF 3K/Reel 30 = 30 pF *Contact ECS for availability of non-developed 33 = 33 pF frequencies/non standard cap values. Rev.2020 th 15351 West 109 Street Lenexa, KS 66219 Phone: 913.782.7787 Fax: 913.782.6991 www.ecsxtal.com ECS-CTE SMD Ceramic Resonator POCKET TAPE DIMENSIONS (mm) DEVLOPED FREQUENCIES SOLDER PROFILE 8.00 MHz Peak solder Temp +260C Max 10 sec Max. 10.00 MHz 2 Cycles Max. 12.00MHz MSL 1, Lead Finish Sn/Ag Figure3) Suggested Reflow Profile th 15351 West 109 Street Lenexa, KS 66219 Phone: 913.782.7787 Fax: 913.782.6991 www.ecsxtal.com