CSL.FM Latches with handle and lock technical informations Stator Glass-fibre reinforced polyamide based (PA) technopolymer, black colour. Rotor Chrome-plated zinc alloy. Front plate Stainless steel. Packing ring Silicon directly applied onto the back side of the stator head. Washer with elastic fixing wings Zinc-plated steel. Closing lever Zinc-plated steel, 2.5 mm thickness. Screw M5x5 zinc-plated. Two keys Nickel-plated brass, removable in two positions at 180. Rotation 180. IP protection IP 65 protection class, according to IEC 529. Standard executions - CSL.: lock with 400 different combinations. Each lock has a couple of keys with different combination. - CSLU.: lock with one combination. All locks have the same combination and can be opened with the same key. Disassembly tool (to be ordered separately) Code 421280 ATTREZZO CSL.FM in AISI 304 stainless steel. Special executions and accessories - Closing levers in other dimensions. - Brass threaded extension for prolonged positioning of the lever, only for stator lengths l1 = 20, 25 and 30 mm (code 421137 C.PQ M5/58). Features Quick assembly with steel plate thickness ranging from 1 to 2 mm latches. Assembly instructions The latch is inserted in the mounting hole of the door on the lever side (see picture) until the wings of the elastic washer snap in, ensuring complete fastening. The latches are supplied with assembled lever for faster mounting. Where needed, the latch can be disassembled from the inside of the door by means of a disassembling tool (to be ordered separately).