DX ELECTRIC DOUBLE LAYER CAPACITORS DYNACAP 5.5V Miniaturized Standard Capacitors Series DX Smaller and lighter than Series DB. 5mm tall. Max. thin profile(H-shaped). Miniaturized but can encase up to 0.33F in 11.5x5mm case. Miniaturized DX DB Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range (C) 25 to +70 Tolerance at rated capacitance (%) 20 to +80 Rated Capacitance (F) 0.047 0.1 0.22 0.33 1.0 Internal resistance at 1 kHz Internal resistance ( ) 120 75 75 75 30 Percentage of capacitance change Within 30% of the value at 20C Characteristics at high and low temperature Internal resistance Less than five times of the value at 20C Test time 1000 hours Endurance (70C) Percentage of capacitance change Within 30% of the initial measured value Internal resistance Within four times of the initial specified value Shelf life (70C) Test time :1000 hours Same as endurance. Outline Drawing Unit: mm Terminal shaped: V Terminal shaped: L (4.5) D0.3 (4.5) D0.3 Sleeve Laser welded Sleeve Laser welded Solder clad stainless steel Solder plated lead steel wire (0.6) 5.00.5 ( 11.5:0.8, 19.0:1.0) Terminal shaped: H 12.40.5 D0.3 Laser welded Sleeve 5.00.5 Solder clad stainless steel (0.8) 10.00.5 Note Part numbering system (example: 5.5V0.1F) Do not apply external force to products or terminals as stress such as twisting, DX 5R5 104 U or T Environmental bending, pushing, or falling of such products or terminals may remove the terminals, Rated voltage Terminal Rated capacitance item Series code resulting in an open/short circuit or liquid leakage. symbol shaped symbol Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. DX 5R5 104 Former item Rated voltage Terminal Rated capacitance Series code symbol shaped symbol Standard Ratings Max. operating voltage(V) Rated capacitance(F) ELNA Parts No. DxL(mm) DX-5R5V473 11.5x13.0 5.5 0.047 DX-5R5H473 11.5x 5.0 DX-5R5L473 11.5x12.4 DX-5R5V104 11.5x13.0 5.5 0.1 DX-5R5H104 11.5x 5.0 DX-5R5L104 11.5x12.4 DX-5R5V224 11.5x13.0 5.5 0.22 DX-5R5H224 11.5x 5.0 DX-5R5L224 11.5x12.4 DX-5R5V334 11.5x13.0 5.5 0.33 DX-5R5H334 11.5x 5.0 DX-5R5L334 11.5x12.4 5.5 1.0 DX-5R5V105 19.0x20.5 NOTE Design, Specifications are subject to change without notice. 140 CAT.No.2004/2005E(2004.10.1) Ask factory for technical specifications before purchase and/or use. 50.3 L0.5 L0.5 4.00.3 5.00.3 (4.5) 5.0 Min. 15.0 Min. L0.5