SG-9101CG-PWT BLANK

Crystal oscillator CRYSTAL OSCILLATOR (Programmable) Product Number SG-9101CA: X1G005301xxxx00 SPREAD SPECTRUM SG-9101CB: X1G005311xxxx00 OUTPUT: CMOS SG-9101CE: X1G005321xxxx00 SG-9101CG: X1G005291xxxx00 SG-9101 series Frequency range : 0.67 MHz to 170 MHz (1 ppm Step) Supply voltage : 1.62 V to 3.63 V Function : Output enable (OE) or Standby (ST) Configurable spread spectrum settings: 2 kinds of spread type, 6 kinds of spread width 4 kinds of modulation frequency, 3 kinds of spread profile CG CE CB CA 2.5 2.0 mm 3.2 2.5 mm 5.0 3.2 mm 7.0 5.0 mm PLL technology to enable short lead time Available field oscillator programmer SG-Writer II 2.5x2.0mm Specifications (characteristics) Item Symbol Specifications Conditions/Remarks 1.80 V Typ. 2.50 V Typ. 3.30 V Typ. V - Supply voltage CC 1.62 V to 1.98 V 1.98 V to 2.20 V 2.20 V to 2.80 V 2.70 V to 3.63 V f 0.67 MHz to 170 MHz Output frequency range O Storage temperature T stg -40 C to +125 C Storage as single product. -40 C to +85 C Operating temperature T use -40 C to +105 C *1 -6 Frequency tolerance f tol 50 10 Average frequency of 1s gate time. 3.4 mA Max. 3.5 mA Max. 3.6 mA Max. 3.7 mA Max. T use = +105 C No load, fO = 20 MHz 2.9 mA Typ. 3.0 mA Typ. 3.2 mA Typ. T use = +25 C Current consumption ICC 5.7 mA Max. 6.0 mA Max. 6.9 mA Max. 8.3 mA Max. T use = +105 C No load, f = 170 MHz O 4.9 mA Typ. 5.9 mA Typ. 7.0 mA Typ. T use = +25 C I dis 3.4 mA Max. 3.4 mA Max. 3.5 mA Max. 3.7 mA Max. OE = GND, f = 170 MHz Output disable current O 0.9 A Max. 1.0 A Max. 1.5 A Max. 2.5 A Max. T use = +105 C I std ST = GND Standby current 0.3 A Typ. 0.4 A Typ. 0.5 A Typ. 1.1 A Typ. T use = +25 C SYM 45 % to 55 % 50 % V Level Symmetry CC I /I Conditions mA OH OL Rise/Fall time Vcc *A *B *C *D I -2.5 -3.5 -4.0 -5.0 VOH 90 % VCC Min. OH Default (f > 40 MHz), O Fast I 2.5 3.5 4.0 5.0 OL Output voltage I -1.5 -2.0 -2.5 -3.0 OH Default (fO 40 MHz) (DC characteristics) IOL 1.5 2.0 2.5 3.0 I -1.0 -1.5 -2.0 -2.5 OH Slow V 10 % V Max. OL CC IOL 1.0 1.5 2.0 2.5 *A 1.62 V to 1.98 V, *B 1.98 V to 2.20 V, *C 2.20 V to 2.80 V, *D 2.70 V to 3.63 V L CMOS 15 pF Max. - Output load condition V 70 % V Min. IH CC Input voltage OE or ST VIL 30 % VCC Max. 3.0 ns Max. f > 40 MHz O Default 6.0 ns Max. fO 40 MHz Rise time 20 % - 80 % VCC, tr/tf L CMOS = 15 pF /Fall time 3.0 ns Max. f = 0.67 MHz to 170 MHz Fast O Slow 10.0 ns Max. fO = 0.67 MHz to 20 MHz Output disable time (OE) tstp oe Measured from the time OE or ST pin crosses 30 % 1 s Max. tstp st V Output disable time (ST) CC tsta oe 1 s Max. Measured from the time OE pin crosses 70 % V Output enable time (OE) CC Output enable time (ST) tsta st 3 ms Max. Measured from the time ST pin crosses 70 % VCC Measured from the time VCC reaches its rated minimum Start-up time t str 3 ms Max. value, 1.62 V Frequency aging f age This is included in frequency tolerance specification. +25 C, first year *1 Frequency tolerance includes initial frequency tolerance, frequency / temperature characteristics, frequency / voltage coefficient, frequency / load coefficient and frequency aging (+25 C, 1 year). Pin description Pin Name I/O type Function *2 High : Specified frequency output from OUT pin OE Input Output enable Low: Out pin is low (weak pull down), only output driver is disabled. *2 1 High : Specified frequency output from OUT pin ST Input Standby Low: Out pin is low (weak pull down), Device goes to standby mode. Supply current reduces to the least as I std. 2 GND Power Ground 3 OUT Output Clock output 4 VCC Power Power supply *2 Please do not use the OE/S T terminal in the open state. Crystal oscillator Product Name Package type Spread width Modulation frequency SG-9101CG 170.000000MHz C 20 P H A A A CG 2.5 mm 2.0 mm Center spread Down spread A 25.4 kHz (Default) CE 3.2 mm 2.5 mm 02 0.25 % B 12.7 kHz CB 5.0 mm 3.2 mm 05 0.5 % -0.5 % C 8.5 kHz Model Package type Frequency CA 7.0 mm 5.0 mm 07 0.75 % D 6.3 kHz 10 1.0 % -1.0 % Spread type Spread width Spread type 15 1.5 % -1.5 % Spread profile C Center spread 20 2.0 % -2.0 % A Hershey-kiss (Default) Function Operating temperature D Down spread 30 -3.0 % B Sine-wave Modulation frequency Spread profile 40 -4.0 % C Triangle Rise/Fall time Function Rise/Fall time P Output enable A Default S Standby B Fast C Slow Operating temperature G -40 C to +85 C H -40 C to +105 C External dimensions (Unit: mm) Footprint (Recommended) (Unit: mm) SG-9101CG SG-9101CG SG-9101CE SG-9101CE SG-9101CB SG-9101CB SG-9101CA SG-9101CA Notes: In order to achieve optimum jitter performance, the 0.1 F capacitor between VCC and GND should be placed. It is also recommended that the capacitors are placed on the device side of the PCB, as close to the device as possible and connected together with short wiring pattern.