0450MDJ

ERSA SMT 60 AC SMD Soldering & Desoldering Station The ERSA SMT UNIT 60 AC is most often used in the repair of SMD PCBs. It is the basic device for soldering and desoldering the most common SMD components. Antistatic according to the MIL-SPEC/ESA standard and therefore safe for electrostati- cally endangered components, this combination station comes with the Micro tool soldering iron and the Chip tool desold- ering pincette. Both are equipped with the tried and proven ERSA RESIS- TRONIC temperature control system, with the ceramic PTC heating elements serving as SMT 60 AC the temperature sensor. The with Micro tool soldering iron and Chip tool, use of these heating elements ERSA RESISTRONIC control system with a high positive tempera- 212 soldering tip series see page 42, ture coefcient affords high 422 desoldering tip series see page 41 heat-up power, so that the tools can be brought to the Order no. Description Rating / voltage Heating time Temperature Weight desired operating temperature range (w/o. cable) very fast. 0SMT60AC SMT 60 AC electronic station complete with 60 W / 230 V, 50 - 60 Hz / 24 V The Micro tool soldering iron Micro tool soldering iron 0270BDJ, tip 0212BDLF and 20 W (350 C) approx. 50 s (280 C) 150 C - 400 C approx. 25 g and the Chip tool desoldering Chip tool - 0450MDJ, tips 0422MD and 2 x 20 W (350 C) subject to tips subject to tips approx. 75 g pincette are connected to the tool holders 0A42 and 0A43 electronic station 0SMT603A E045600 Extension set for tip turn protection set for the use of another desoldering tip pair of the 422 series through coded plug connec- tors to prevent a mix-up, and can be independently and simultaneously operated. The internal heating of the tips provides great thermal efciency. The soldering and desoldering tips are connected with high E045600 impedance to the front-installed potential equalization socket. Both tools are equipped with IRHP 200 E045600 a highly exible, heat-resistant Infrared rework heating plate see page 29 Extension set for tip turn protection set for the use of another desoldering tip pair of the 422 series and antistatic connecting cable. The Mini, Micro and SolderWell soldering tips (see page 42) allow Fine-Pitch components Quick and easy SMD to be soldered in the shortest rework: possible time with top solder A process description on Fine-Pitch solde- quality. The desoldering tips ring and desoldering of SMD components is of the ERSA Chip tool range available at: www.ersa.com from paired desoldering tips for MICROMELFs to inserts for PLCC 84 housings (see page 41). The two duroplastic tool holders Removal of residual solder have a sponge receptacle with a viscous sponge for tip clean- ing and also serve as clearly arranged tip holders. Since the soldering and desold- ering tips are only plugged in, they can be easily exchanged using the ERSA tip exchanger 3ZT00164 even when hot. Superne SMD soldering tip (0212SD) SMD soldering with the Micro tool Desoldering with the Chip tool 24 25X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for ersa manufacturer: Other Similar products are found below : 0162KD 0085JD E008100 0A04 0A39 0DIG20A84 0A48 ERSA-832EDLF ERSA-012BD ERSA-MINITYP ERSA-81100J 0832KDLF/SB 0832YDLF/SB 0A52 BASIC SET INDEPENDENT 75 ERSA 0102WDLF23/SB 0102PDLF02/SB CHIP TOOL VARIO 0WICKNC2.7/SB SVP100 0152JD 0ICV2000AI 0T55 0ANA60 E033100 E096100 0102WDLF35/SB 0200MD 0550MD 055JD 05X100 0A43 0ICV2000A 0ICV2000AC E092100 0130CDK 0172LD 0760CD 0930CD 0IC2000AXT 0612KDLF/SB ERSA-MINOR ERSA- RDS80 ERSA-832YDLF ERSA-212WD 072604/10 0842CDLF/SB 0832UDLF/SB 0842SDLF/SB 0A42