Thermal-Magnetic Circuit Breaker 2210-S2... Description One, two and three pole thermal-magnetic circuit breakers with tripfree mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for panel or plug-in mounting. Available with auxiliary contacts (1 x N/O, 1 x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. A choice of characteristic curves further extends the range of applications possibilities for these CBEs. Special auxiliary contact versions for industrial atmosphere and low voltages (e. g. 5 V) available on request. Approved to CBE standard EN 60934 (IEC 60934). Suitable for use in distribution rails see section Power Distribution Systems. 1 2210-S2.. Typical applications Process control equipment, robotics, machine tool control, communications Technical data systems, instrumentation, rail vehicles. Special versions, e.g. for aggressive environmental conditions and low voltages (e. g. 5 V) on request. For further details please see: 2 A 2 A 2 A M1 M1 M1 25 Thermal-Magnetic Circuit Breaker 2210-S2... Ordering information Dimensions Type No. 30.5 2210 single or multipole thermal-magnetic circuit breaker Z 1.20 Mounting 18 S socket or panel mounting .709 Actuator design ON OFF 2 toggle Number of poles 1 1-pole protected 2 2-pole protected 19 37.5 3 3-pole protected .748 1.48 3.5 43 Panel mounting .138 1.69 25 1 with M3 thread .984 Terminal design (main contacts) 1 P1 blade terminals 6.3-0.8 (QC .250) 12.5 .492 Characteristic curve 11.5 F1 fast acting: therm.1.01-1.4xI magn.2-4xI DC (DC only) N N 1211 3 24 12 2 .453 F2 fast acting: therm.1.01-1.4xI N magn.3.5-6.5xI AC/ 4.5-8.5xI DC N N M1 standard delay: therm. 1.01-1.4xI N 6.8 polarizing tooth 12.5 12.5 magn. 6-12xI AC 7.8-15.6xI DC N N .268 .492 .492 T1 delayed: therm. 1.01-1.4xI magn. 10-20xI AC N N 6x6.8 = 40.8 blade terminals M3 standard delay, low resistance: therm.1.4-1.8xI 6x.268 = 1.61 N DIN 46244-A6.3-0.8 (QC .250) magn. 6-12xI AC 7.8-15.6xI DC N N 50 Intermediate position mounting thread M3 1.97 max. screw length 5.8 mm (.228 in.) H without intermediate position (standard) 32 tightening torque max. 0.5 Nm Z with intermediate position 1.26 Auxiliary contacts unit III 1 with auxiliary contacts in all poles 2 with auxiliary contacts in pole 1 unit II (only multipole devices) not suitable for Module 17plus unit I Auxiliary contact function (see diagram) multipole devices 1 one each N/C and N/O (standard) 16 4 one N/O contact, closed in the .630 intermediate and ON position (-Z only) Auxiliary contact - terminal design 1 same as main terminals Cut-out dimensions Current ratings 0.1...25 A 2210 - S 2 1 1 - P1 F1 - H 1 1 1 - 10 A ordering example 32 3-pole 1.26 2-pole 16 1-pole Please be informed that we have minimum ordering quantities to be .630 observed. 11.5 .453 Approvals 90 recess with panel thickness Authority Standard Rated voltage Current ratings s > 1.5 mm (.059 in.) 11.5 VDE IEC/EN 3 AC 433 V 0.1 A25 A .453 AC 250 V 0.1 A25 A 60934 DC 65 V 0.1 A25 A UL UL 1077 AC 277/480 V 0.1 A25 A Installation drawing AC 277 V 0.1 A25 A DC 65 V 0.1 A25 A CSA C22.2 No AC 277/480 V 0.1 A25 A operating area AC 277 V 0.1 A25 A 235 (reinforced insulation) DC 65 V 0.1 A25 A CQC GB 17701 AC 250/433 V 0.1 A25 A 0.1 A25 A AC 250 V 0.1 A25 A DC 65 V DNV GL IEC60934, 3 AC 433 V 0.1 A25 A CG 0339 AC 250 V 0.1 A25 A DC 65 V 0.1 A25 A 1211 3 24 12 2 mounting area (standard insulation) mm This is a metric design and millimeter dimensions take precedence ( ) inch 2102 2 www.e-t-a.de 25 4 .157 36.6 24 0 0 0 5.5 10 1 .217 .394 .039 5 68 10.5 11 12.5 12.5 2.68 .413 .433 20 1.5 12 .472 s 1.44 .945 .197 .492 .492 .787 .059