High Performance Thermal Circuit Breaker 583-... Description Three pole, miniaturised, aircraft style thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). An indicator band on the push button clearly shows the tripped/off position. Threadneck panel mounted, available in metric and US (AS 14154) configurations. Advanced two-chamber design minimises contact contamination to provide fail-safe operation. Temperature compensated with optional auxiliary contacts, and fully approved for use on a wide range of aircraft and equipment. Various dummies are available without protective function, allowing connection of pre-installed wiring without loads. 1 583-... without auxiliary contact with auxiliary contact Typical applications Aircraft systems and equipment (fixed wing and helicopters) other extra low voltage wiring applications defence equipment communications Technical data systems. For further details please see: www.e-t-a.de/ti e Voltage rating 3 AC 200 V (300 Hz to 800 Hz) DC 28 V Standard current ratings and typical volt drop values Current rating range 1...30 A Auxiliary circuit 0.5 A, DC 28 V Current Volt drop per Current Volt drop per Typical life 20,000 operations mechanical rating (A) pole (mV) rating (A) pole (mV) 10,000 operations at I ( 25 A) N 1 750 7.5 230 4,000 operations at I (30 A) N Ambient temperature -55...+125 C (-67...+257 F) 15 A 2 520 10 190 -55...+90 C (-67...+194 F) > 15 A 2.5 400 15 190 Insulation co-ordination rated impulse pollution (IEC 60664 and 60664A) withstand voltage degree 3 360 20 200 1.5 kV 3 4 350 25 170 Dielectric strength (IEC 60664 and 60664A) test voltage 5 260 30 160 operating area AC 1,500 V pole/pole AC 1,500 V main to aux. circuit AC 1,500 V Approvals Insulation resistance > 100 M (DC 500 V) Interrupting capacity I cn 3 AC 200 V (400 Hz): 4 A 1,000 A Authority Standard Voltage ratings Current 5 A 2,000 A ratings 7.5...25 A 2,500 A Bw VG AC 115/200 V, 400 Hz 1 A25 A 30 A 1,500 A 95345, DC 28 V 1 A25 A DC 28 V: 1...25 A 6,000 A part 11 30 A 4,000 A Bw LN 29887 AC 115/200 V, 400 Hz 5 A25 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Dep. of the Navy AS14154 AC 115/200 V, 400 Hz 1 A20 A Vibration 10 g (57-2000 Hz), 0.76 mm (5-57 Hz) QPL Canada VG AC 115/200 V, 400 Hz 1 A25 A (sinusoidal) to VG 95210, sheet 19, Dep. of National 95345, DC 28 V 1 A25 A IEC 60068-2-6, test Fc, ISO 7137 Defence part 11 2 Vibration (random) 16.4 g rms, 0.2 g Hz 1.5 dB, to VG 95210, sheet 29, QPL Sweden LN 29887 AC 115/200 V, 400 Hz 1 A25 A IEC 60068-2-6, test Fc, ISO 7137 Defence Material MS 14154 DC 28 V 1 A25 A Admin. Acceleration 17 g, to ISO 2669 Shock 50 g (11 ms), to VG 95210, sheet 28, QPL UK LN 29887 AC 115/200 V, 400 Hz 5 A25 A IEC 60068-2-27, test Ea, ISO 7137 Ministery of Corrosion 96 hours at 5 % salt mist Defence 48 hours at 20 % salt mist Airbus EN AC 115/200 V, 400 Hz 1 A25 A to VG 95210, sheet 2, 2996-004 IEC 60068-2-11, test Ka, ISO 7137 Airbus EN AC 115/200 V, 400 Hz 1 A25 A Humidity 240 hours at 95 % RH, 2996-005 to VG 95210, sheet 7, IEC 60068-2-3, test C/ISO 7137 Explosion to VG 95210, sheet 10, MIL-STD-202, meth. 109 Altitude 25,000 m above sea level Mass max. 67 g with auxiliary contact max. 63 g without auxiliary contact Mass reduction through aluminium threadneck approx. 3 g 1948 www.e-t-a.de 1max. 1.5 max059 max. 1.5 max059 45 45 High Performance Thermal Circuit Breaker 583-... Dimensions 583-G411-K1M1-A1S0TN (VG 95345 T11) Ordering information Type No. 583 three pole, with temperature compensation Mounting tightening torque max. 4 Nm M12x1 G threadneck panel mounting 10 Threadneck design 8.4 .394 1 M12x1x6.4x8.8 dia. with mounting plate (aux. contact version) .331 black 3 MJ12x1x6.4x8.8 dia. (only without aux. contact) white 4 M12x1x6.4x8.8 dia. (only without aux. contact) lock washer 5 7/16-32UNx6.4x7.8 (only without aux. contact) 7 7/16-32 UNx6.4x7.8 dia. with mounting plate (aux.contact version) 8 M12x1x6.4x8.8 with mounting plate, aluminium threadneck C1 B1 A1 9 M12x1x6.4x8.8, aluminium threadneck Hardware for threadneck (washers) 1 0 without hardware 8.5 2.5 .335 .098 1 corrugated washer 12/15, fitted terminals: 12.8 5 2 serrated lock washer 12.1/17.2, fitted A1, B1, C1 - input .197 .504 A2, B2, C2 - output 3 toothed washer 11.3/14.9, fitted 15 15 25.5 .591 .591 5 serrated lock washer 12.1/17.2, bulk shipped 1.00 teminal screw ISO 7045-M4x6 Hardware for threadneck (nuts) with lock washer DIN 137 B4 0 without hardware tightening torque max. 1.2 Nm mounting holes 1 hex nut M12x1 +0.15 max. 19.8 3.2 3 hex nut 7/16-32UN +.006 .126 max .780 current rating in A 5 hex nut MJ12x1 (only with threadneck design 3) min. 50 7 hex nut M12x1, aluminium, bulk shipped min. 1.97 Terminal design (main terminals) K screw terminals with metric thread 1 K14 (M4, MJ4) J screw terminals with inch thread +0.2 1 J14 (8-32UNC-2B) 12.5 +.008 .492 Characteristic curve 0.8 M1 thermal, 1.15-1.38 I .031 N location pin 9.5 Terminal screws .374 A Phillips screw M4x6 B Phillips screw 8-32UNC-2Ax6 (MS 51957-41) thickness 1.5 - 3 mm .059 - .118 in. K hex screw with Phillips head 8-32UNC-3Ax7.6 L Phillips screw MJ4x6 Z without accessories Terminal washers Dimensions 583-G533-J1M1-B2S0XN (AS14154) 0 without lock washer 1 lock washer B4 2 lock washer 4.3 (MS 35338-137) 5 lock washer 4.3/9 tightening torque max. 3 Nm Auxiliary contact 7/16-32-UN-2A THD S0 without auxiliary contact 10 8.4 S1 with auxiliary contact (N/C) (connector .394 .331 to EN 3155-016M2018, size 20) black white S5 with polarized auxiliary contact (N/C) lock washer Barrier T barrier 25.5 mm wide, 37.7 mm long (-S0 only) C1 B1 A1 U barrier 19.5 mm wide, 37.7 mm long X barrier 19.5 mm wide, 34.1 mm long Colour of the push button 8.5 2.5 (blank) black (standard) (e.g. 7.5) .335 .098 G green to EN (e.g. 7 1/2) 12.8 terminals: 5 A1, B1, C1 - input N black to EN (e.g. 7 1/2) .504 .197 A2, B2, C2 - output 15 15 Current ratings .591 .591 teminal screw MS 51957-41 (8-32 UNC-2A) 1...30 A with lock washer MS 35338-137 tightening torque max. 1.2 Nm mounting holes 583 - G 4 1 1 - K 1 M1 - A 1 S0 T . - 5 A ordering example +0.15 max. 19.8 3.2 +.006 max .780 .126 Please be informed that we have minimum ordering quantities to be current rating in A min. 50 observed. min. 1.97 Ordering information for approved devices +0.2 11.5 583-G411-K1M1-A1S0TN (583-96-TC-K14) +.008 .453 0.8 Metric threadneck M12x1 and terminal design -K14 (M4x6), listed .031 9.5 by the German Materialamt der Bundeswehr to VG 95345 T11374 location pin thickness 1.5 - 3 mm 583-G533-J1M1-B2S0XN (AS 14154) .059 - .118 in. Threadneck size 7/16-32UNSx6.4 and terminal design -J14 (inch thread 8-32), approved to AS 14154. mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 1948 45 45 min181 min181 min. 4.6 min. 4.6 max. 46.7 max. 47 6.35 6.35 max. 1.84 max. 1.85 .250 .250 2 2 1.5 1.5 .079 .079 .059 .059 5 5 31 6.5 ON min. 11.9 ON max. 31 SW14 SW14 .256 1.22 min .469 max. 1.22 .551 12.5 OFF .551 36.5 max. 35.1 max. 19 OFF 1.44 .492 min. 30 min. 30 max. 1.38 max .748 38 min. 1.18 min. 1.18 1.50 3.5 min. 3 .138 min .118 0.2 0.2 9.5 9.5 .008 .008 .374 .374