ISO100-2 Europa

ISO100-4 Layout 1 31/10/2013 16:17 Page 1 Technical Data: Mainswitch/Isolator ISO63-2 & ISO100-2 2 Pole Important Safety Notice It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore fit for purpose . Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. Terminals, including factory fitted, should be checked periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Product Ranges ISO63-2 & ISO100-2 Standard(s) IEC 60947-3, EN 60947-3 Certification CE, SEMKO Rated Current (In) 63 & 100A Rated Uninterupted Current (Iu) 63 & 100A Rated Operational Voltage (Ue) AC 230(240)/400(415)V Rated Frequency 50/60Hz Rated impulse withstand Voltage (Uimp) 6kV Number of Poles 2 Rated Insulation Voltage (Ui) 500V Utilization Category AC-22B Operating Temperature -5 to 40C* Altitude Not exceeding 2000 metres Humidity Not exceeding 50% at 40C and 90% at 20C Pollution Degree 3 Terminal protection IP20 Mounting 35mm DIN Rail Terminal Type Tunnel Terminal Capacity 2.5-50mm Recommended Terminal Torque 2.0Nm * average not exceeding 35C over a 24 hour period 78 66 50 Terminal height 36 6 from DIN rail 16 Page 1 of 1 EDS1070-001 87 83 45X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for europa manufacturer: Other Similar products are found below : EUC2P2C EUC2P50C PBEKEY010 EUC1P2C PBE2821013 PBE332513C EUC1P32C PBE504017 EUC1P20C