FP-1310-5I-50SMF-FCAPC

Preliminary 1310 NM FABRY-PEROT (FP) DATA LASER DIODE SHEET PIGTAILED PACKAGE FP-1310-5I-XXX The FP-1310-5I-xxx is an MOCVD grown InAlGaAs ridge laser diode with FEATURES: emission wave-length of 1310 nm and standard continuous light output of 5 Wide operating temperature mW per facet. These lasers provide stable, single transverse mode oscillation. (-40C to 85C) These are hermetically sealed devices with an integrated monitor photodiode to monitor the optical output. Stable threshold current for easy transmitter control (T ~ 80K) 0 The TO-56 laser can is mounted inside a metal coaxial package which is then pigtailed with a singlemode fiber and terminated with a fiber connector. The 1310 nm typical emission pigtail comes in a choice of 50cm or 100cm lengths as standard, terminated wavelength FP-LDs with either FC or SC connectors with an APC or UPC polish. Pigtailed package Suitable as a light source for data-com and telecom applications with data High-speed modulation rates up to 5 Gb/s. capability (Up to 5Gb/s) Excellent reliability Ultra-low gradual wear-out rates <1% failures in 20 yrs at 55C APPLICATION Part Number Description Source for high-speed data-communication and 1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode FP-1310-5I-50SMF-FCUPC telecommunication links pigtailed package, FC UPC connector. 1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode SONET, Fiber-channel, FP-1310-5I-50SMF-FCAPC pigtailed package, FC APC connector. Giag-bit Ethernet, FTTX 1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode CATV / Satellite and other FP-1310-5I-100SMF-SCUPC pigtailed package, SC UPC connector. analogue markets 1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode FP-1310-5I-100SMF-SCAPC pigtailed package, SC APC connector Other fiber lengths and connector options available on request.FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE ABSOLUTE MAXIMUM RATINGS Symbol Parameter Conditions Rating Unit P Output power CW 10 mW O V LD Reverse voltage (laser diode) - 2 V R V PD Reverse voltage (monitor photodiode) - 10 V R I PD Forward current (photodiode) - 1 mA F T - -40 to +85 C Operation temperature c T Storage temperature - -40 to +100 C stg - ESD exposure level (human body model) - 200 V NOTICE: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE: The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product